MVWC465HW Error Codes — Maytag Washing Machine
🏷️ Model: MVWC465HW 📅 Production: 2018–2021 🫧 Type: Washing Machine
Maytag's VMW-platform top loader — mechanically the same platform as Whirlpool's WTW series, so it shares the F#E# code set.
Most Common Codes on the MVWC465HW
All Other Maytag Washing Machine Codes
The MVWC465HW can also display any of the standard Maytag washing machine codes:
F9E1 Drain failure — water not draining F5E2 Lid will not lock — latch blocked or failed F5E1 Lid lock fault — cannot lock or unlock F5E3 Lid will not unlock — latch or control fault F7E1 Motor / basket speed sensor fault — drive system F7E3 Motor / drive system fault — basket not reaching speed F7E6 Motor control fault — drive electronics error F7E7 Motor unable to reach target speed F8E2 Dispenser fault — detergent dispenser system error F2E3 Control / user interface fault — communication mismatch F3E1 Water level / pressure sensor fault F6E1 Communication error — main control to motor control F20 No water detected — fill failure F22 Door lock fault — door will not lock F26 Door switch error — door state not detected F28 Serial communication error — control boards not communicating HC Hot and cold water hoses reversed LF Long fill — washer taking too long to fill oL Overloaded — load too large for the basket PF Power failure — cycle interrupted by loss of power
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Maytag washing machine code list.