ApplianceErrors.com

Maytag Washing Machine Error Code F2E3

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 14, 2026
⚠ Medium Severity 🔧🔧 Moderate DIY

Control / user interface fault — communication mismatch

F2E3 indicates an issue with the appliance control unit, the user interface, or the wiring between them — the two are not communicating consistently. Button presses may not register or cycles may not start.

💰 DIY cost: $60–$170 👨‍🔧 Pro cost: $150–$320 Save $90+ by doing it yourself
Maytag Washing Machine error code F2E3 on the display panel
How the F2E3 code appears on a Maytag washing machine display

What Does Error Code F2E3 Mean on a Maytag Washing Machine?

Control / user interface fault — communication mismatch.

F2E3 indicates an issue with the appliance control unit, the user interface, or the wiring between them — the two are not communicating consistently. Button presses may not register or cycles may not start.

What Causes Error Code F2E3?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Wiring/connector between control and UI loose 50% of cases
  2. 2
    User interface board failure 30% of cases
  3. 3
    Main control board fault 20% of cases

How to Fix Maytag Washing Machine Error Code F2E3

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Unplug for 1 minute.

  2. 2

    Reseat the UI connector

    Check and firmly reseat the harness between the user interface and the main control.

  3. 3

    Replace the user interface board

    If the connection is sound but F2E3 persists.

    🔩 Maytag washer user interface board ($60–$170)
    ⚠️ Unplug before servicing.

How to Reset Error Code F2E3

Unplug 1 minute and reseat the UI connector. Replace the UI board if F2E3 persists.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

If a new UI board and F2E3 persists, the main control board has failed.

Average professional repair cost for this issue: $150–$320

Related Error Codes

F1E1
Main electronic control board failure
⚠ High Severity

Same Code on Other Brands

Error code F2E3 appears on these other brands too. See every brand that shows F2E3 →

Whirlpool logo
Whirlpool Washing Machine F2E3
Cycle fault — control detects a mismatch or stuck cycle state

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Washing Machine:

🔩
Search PartSelect
Maytag Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Washing Machine Error Codes

F9E1 Drain failure — water not draining F8E1 Low water fill detected SUD Excessive suds — too much detergent F5E2 Lid will not lock — latch blocked or failed F5E1 Lid lock fault — cannot lock or unlock F5E3 Lid will not unlock — latch or control fault

Frequently Asked Questions

What does error code F2E3 mean on a Maytag Washing Machine? +
Control / user interface fault — communication mismatch
How do I fix error code F2E3 on my Maytag Washing Machine? +
Start by Unplug for 1 minute.. If that doesn't resolve it, work through each step in the fix guide above.
How do I clear or reset error code F2E3? +
Unplug 1 minute and reseat the UI connector. Replace the UI board if F2E3 persists.
Is error code F2E3 serious? +
Medium severity. The appliance may still operate but the issue should be resolved to prevent further damage.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 14, 2026.

← All Maytag Washing Machine Error Codes ← All Maytag Error Codes