How to Enter Diagnostic Mode on a Maytag Washing Machine

Maytag washers are Whirlpool-platform machines — the VMW knob-sequence diagnostic and F#E# code set apply.

Step-by-Step: Maytag Washing Machine Diagnostics

1
Top-load dial models: rotate the cycle knob counterclockwise one full turn, then clockwise 3 clicks, counterclockwise 1, clockwise 1 — status lights flash when diagnostic mode engages.
2
Stored F#E# codes display as light patterns decoded by the tech sheet (under the main top or behind the console).
3
Front-load models display codes directly; service-mode entry is on the tech sheet inside the lower panel.
4
Maytag's branding aside, parts and procedures interchange with equivalent Whirlpool models — searching the F#E# code works across both brands.

💡 Good to know: If the 3-1-1 sequence doesn't take, rotate fully counterclockwise and retry with ~half-second clicks — timing is the usual failure.

Found a Code? Look It Up

Once diagnostics shows you a stored code, find its meaning and fix guide in the full Maytag washing machine code list. These are the highest-priority codes on this platform:

F9E1

Drain failure — water not draining

⚠ High Severity

F1E1

Main electronic control board failure

⚠ High Severity

Frequently Asked Questions

Are Maytag and Whirlpool washer error codes the same? +

Yes — Maytag has been a Whirlpool brand since 2006 and current models share the VMW/front-load platforms and F#E# diagnostic code set.

How to Reset a Maytag Washing Machine → ← All Maytag Washing Machine Error Codes