ApplianceErrors.com

Maytag Washing Machine Error Code F7E7

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 14, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Motor unable to reach target speed

The drive motor could not reach the commanded speed within the allowed time. An overloaded or unbalanced basket, a drive fault, or a motor control problem can cause this.

💰 DIY cost: $40–$280 👨‍🔧 Pro cost: $250–$520 Save $210+ by doing it yourself
Maytag Washing Machine error code F7E7 on the display panel
How the F7E7 code appears on a Maytag washing machine display

What Does Error Code F7E7 Mean on a Maytag Washing Machine?

Motor unable to reach target speed.

The drive motor could not reach the commanded speed within the allowed time. An overloaded or unbalanced basket, a drive fault, or a motor control problem can cause this.

What Causes Error Code F7E7?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Overloaded or unbalanced load 35% of cases
  2. 2
    Drive coupling / shifter fault 35% of cases
  3. 3
    Motor control fault 30% of cases

How to Fix Maytag Washing Machine Error Code F7E7

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Redistribute the load

    Remove some items and rebalance, then restart.

  2. 2

    Power cycle

    Unplug for 1 minute.

  3. 3

    Inspect the drive system

    Check the shifter, coupling, and motor if F7E7 persists.

    🔩 Maytag washer shift actuator ($40–$90) 🔩 Maytag washer drive motor ($120–$280)
    ⚠️ Unplug before servicing.

How to Reset Error Code F7E7

Rebalance the load and unplug 1 minute. Inspect the drive system if F7E7 persists.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

If the load is balanced and F7E7 persists, the drive system needs professional diagnosis.

Average professional repair cost for this issue: $250–$520

Related Error Codes

F7E1
Motor / basket speed sensor fault — drive system
⚠ High Severity
F7E6
Motor control fault — drive electronics error
⚠ High Severity

Same Code on Other Brands

Error code F7E7 appears on these other brands too. See every brand that shows F7E7 →

Whirlpool logo
Whirlpool Washing Machine F7E7
Motor unable to reach target speed

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Washing Machine:

🔩
Search PartSelect
Maytag Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Washing Machine Error Codes

F9E1 Drain failure — water not draining F8E1 Low water fill detected F1E1 Main electronic control board failure SUD Excessive suds — too much detergent F5E2 Lid will not lock — latch blocked or failed F5E1 Lid lock fault — cannot lock or unlock

Frequently Asked Questions

What does error code F7E7 mean on a Maytag Washing Machine? +
Motor unable to reach target speed
How do I fix error code F7E7 on my Maytag Washing Machine? +
Start by Remove some items and rebalance, then restart.. If that doesn't resolve it, work through each step in the fix guide above.
How do I clear or reset error code F7E7? +
Rebalance the load and unplug 1 minute. Inspect the drive system if F7E7 persists.
Is error code F7E7 serious? +
This is a high-severity error. You should address it soon. Running the appliance may cause further damage.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 14, 2026.

← All Maytag Washing Machine Error Codes ← All Maytag Error Codes