Maytag Washing Machine Error Code F5E2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY

Lid will not lock — latch blocked or failed

The most common cause of the F5E2 error on a Maytag washing machine is obstruction in the lid latch/strike (~40% of cases); start with: clear the latch area.

💰 DIY cost: $40–$110 👨‍🔧 Pro cost: $150–$300 Save $110+ by doing it yourself

Maytag Washing Machine error code F5E2 on the display panel — How the F5E2 code appears on a Maytag washing machine display

What Does Error Code F5E2 Mean on a Maytag Washing Machine?

Lid will not lock — latch blocked or failed.

F5E2 fires when the control board commands the lid lock to engage but never receives confirmation that the latch reached the locked state. The board watches the lock's switch feedback; if the strike is blocked, the motorized latch has failed, or the wiring is open, lock is not verified and the wash cannot proceed to spin. It differs from F5E1 (lid opened during a cycle) and F5E3 (lid will not unlock), which concern the opposite lock states.

Models affected: Top-load Maytag washers on the Whirlpool VMW platform with a motorized lid lock, such as the MVWC465HW and MVW4505MW; front-load models with door locks report different codes.

What owners report: Owners commonly report this appearing right after loading, often traced to laundry or a fabric-softener cap bridging the strike so the lid never seats fully. A common quick win is clearing the latch path and reseating the lid; a brief power cycle sometimes clears a one-off fault before any part is replaced.

What Causes Error Code F5E2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Obstruction in the lid latch/strike 40% of cases
2

Lid lock assembly failure 40% of cases
3

Wiring to lid lock damaged 20% of cases

How to Fix Maytag Washing Machine Error Code F5E2

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Clear the latch area

Make sure nothing blocks the lid from closing fully and the strike enters the lock cleanly.
2

Power cycle

Unplug for 1 minute, then restore power.
3

Replace the lid lock assembly

If the lock will not engage.

🔩 Maytag washer lid lock assembly ($40–$110)

⚠️ Unplug before servicing.

How to Reset Error Code F5E2

Clear the latch, unplug 1 minute. Replace the lid lock if F5E2 persists.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Maytag washer reset guide → Enter diagnostic mode → Symptom guide: Washer won't start →

Did this guide fix your appliance?

When to Call a Professional

If a new lid lock and F5E2 persists, the control board lock output has failed.

Average professional repair cost for this issue: $150–$300

Related Error Codes

F5E1

Lid lock fault — cannot lock or unlock

⚠ Medium Severity

F5E3

Lid will not unlock — latch or control fault

⚠ Medium Severity

Same Code on Other Brands

Error code F5E2 appears on these other brands too. See every brand that shows F5E2 →

Whirlpool Washing Machine F5E2

Door lock failure — latch cannot engage

Whirlpool Dishwasher F5E2

Door will not latch / lock — latch mechanism fault

KitchenAid Washing Machine F5E2

Door lock failure

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Washing Machine:

🔩

Search PartSelect

Maytag Washing Machine repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Washing Machine Error Codes

F9E1 Drain failure — water not draining F8E1 Low water fill detected F1E1 Main electronic control board failure SUD Excessive suds — too much detergent F7E1 Motor / basket speed sensor fault — drive system F7E3 Motor / drive system fault — basket not reaching speed

Frequently Asked Questions

Can I keep using my Maytag Washing Machine when error F5E2 appears? +

You often can for a cycle or two, but the door issue behind F5E2 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F5E2 on a Maytag Washing Machine? +

Across reported Maytag washing machine repairs, the most frequent is obstruction in the lid latch/strike (40% of cases), lid lock assembly failure (40%), then wiring to lid lock damaged (20%). Check them in that order before replacing any parts.

F5E2 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F5E2 fault; if it returns, the door problem is still present. Move on to the physical checks — clear the latch area, then power cycle — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Maytag Washing Machine error F5E2? +

A DIY repair typically runs $40–$110 in parts, versus $150–$300 for a professional service call, so handling it yourself saves around $110. Expect the work to take roughly 30–60 minutes.

Which Maytag Washing Machine models show error F5E2? +

F5E2 is documented on Top-load Maytag washers on the Whirlpool VMW platform with a motorized lid lock, such as the MVWC465HW and MVW4505MW; front-load models with door locks report different codes.. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Maytag Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Maytag Washing Machine Error Codes ← All Maytag Error Codes