ApplianceErrors.com

Maytag Washing Machine Error Code PF

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
✓ Low Severity 🔧 Easy DIY

Power failure — cycle interrupted by loss of power

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $80–$180 Save $80+ by doing it yourself
Maytag Washing Machine error code PF on the display panel
How the PF code appears on a Maytag washing machine display

What Does Error Code PF Mean on a Maytag Washing Machine?

Power failure — cycle interrupted by loss of power.

PF (Power Failure) means the washer lost power during a running cycle. It is an informational alert, not a component fault — the cycle was interrupted and needs to be restarted. Frequent PF codes can point to a loose power connection or an unreliable outlet.

What Causes Error Code PF?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Momentary power loss during the cycle 70% of cases
  2. 2
    Loose or damaged power cord / outlet connection 20% of cases
  3. 3
    Control board power-sense fault 10% of cases

How to Fix Maytag Washing Machine Error Code PF

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Restart the cycle

    Press START to resume or restart the interrupted cycle.

  2. 2

    Check the power connection

    If PF recurs, confirm the cord is fully seated and the outlet is sound (no flickering or loose plug).

    ⚠️ Unplug before inspecting the cord or outlet.

How to Reset Error Code PF

Press START to restart the cycle. If PF keeps appearing without a known outage, check the cord and outlet.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

PF is informational. Repeated PF codes with no power outages suggest a loose connection or a control board power-sense fault.

Average professional repair cost for this issue: $80–$180

Same Code on Other Brands

Error code PF appears on these other brands too. See every brand that shows PF →

LG logo
LG Dryer PF
Power failure — cycle interrupted
LG logo
LG Oven PF
Power failure — unit lost power during operation (not a fault)
Whirlpool logo
Whirlpool Washing Machine PF
Power failure — a power interruption stopped the cycle
Whirlpool logo
Whirlpool Dryer PF
Power failure — a power interruption stopped the cycle

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Washing Machine:

🔩
Search PartSelect
Maytag Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Washing Machine Error Codes

F9E1 Drain failure — water not draining F8E1 Low water fill detected F1E1 Main electronic control board failure SUD Excessive suds — too much detergent F5E2 Lid will not lock — latch blocked or failed F5E1 Lid lock fault — cannot lock or unlock

Frequently Asked Questions

Can I keep using my Maytag Washing Machine when error PF appears? +
Usually yes — PF is a low-severity power notice that rarely stops the washing machine from working, but clearing the underlying cause prevents it from escalating.
What most commonly causes PF on a Maytag Washing Machine? +
Across reported Maytag washing machine repairs, the most frequent is momentary power loss during the cycle (70% of cases), loose or damaged power cord / outlet connection (20%), then control board power-sense fault (10%). Check them in that order before replacing any parts.
PF keeps coming back after a reset — what should I check next? +
A reset only clears the stored PF fault; if it returns, the power problem is still present. Move on to the physical checks — restart the cycle, then check the power connection — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Maytag Washing Machine error PF? +
A DIY repair typically runs $0–$0 in parts, versus $80–$180 for a professional service call, so handling it yourself saves around $80. Expect the work to take about 10–20 minutes.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Maytag Washing Machine Error Codes ← All Maytag Error Codes