DVG45T3200W Error Codes — Samsung Dryer
🏷️ Model: DVG45T3200W 📅 Production: 2020–present 🌀 Type: Dryer
7.5 cu ft gas dryer. The nG (no gas) code usually means a closed supply valve or failed igniter rather than a control fault.
Most Common Codes on the DVG45T3200W
All Other Samsung Dryer Codes
The DVG45T3200W can also display any of the standard Samsung dryer codes:
OD Vent blockage detected FE Frequency error — abnormal power supply frequency Et Communication error — connection between boards bC2 Button card error — control panel communication failure AE Communication error — internal signal failure 1 AC Air circulation error — insufficient airflow detected through the drum Clg Clog warning — exhaust duct restriction detected (early D80/D90 indicator) PS Duct sensor blockage — vent/moisture sensor reading abnormal due to restricted exhaust tS Thermistor short circuit — temperature sensor reading too low resistance tO Thermistor open circuit — temperature sensor disconnected or failed open dC Door open — door detected open during operation
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Samsung dryer code list.