ApplianceErrors.com

Samsung Dryer Error Code FE

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Frequency error — abnormal power supply frequency

The most common cause of the FE error on a Samsung dryer is power inverter or generator with non-standard frequency (~50% of cases); start with: check power source.

💰 DIY cost: $0–$280 👨‍🔧 Pro cost: $200–$420 Save $200+ by doing it yourself
Samsung Dryer error code FE on the display panel
How the FE code appears on a Samsung dryer display

What Does Error Code FE Mean on a Samsung Dryer?

Frequency error — abnormal power supply frequency.

The control board samples the incoming AC line and measures its frequency, expecting a stable 60 Hz in North America. FE fires when the measured frequency drifts outside the accepted window, prompting the board to halt operation so the motor is never driven at an incorrect speed. Unlike voltage-related faults, FE is specifically about cycle rate rather than magnitude, which is why it commonly surfaces on generator or inverter power that produces an unstable or off-spec waveform.

Models affected: Samsung electric and gas dryers with electronic control boards that monitor incoming AC power, broadly across recent model years
What owners report: Owners commonly report FE when running the dryer from a portable generator, an inverter, or during unstable utility conditions, and it often clears once the machine is plugged back into clean household power. When the code persists on normal utility power with no generator involved, owners typically find the fault points to the control board rather than the outlet.

What Causes Error Code FE?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Power inverter or generator with non-standard frequency 50% of cases
  2. 2
    Faulty internal power monitoring circuit 30% of cases
  3. 3
    Voltage fluctuation causing frequency distortion 20% of cases

How to Fix Samsung Dryer Error Code FE

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Check power source

    If using a generator or inverter, ensure it outputs a clean 60 Hz sine wave.

  2. 2

    Test on utility power

    Plug directly into utility power (not generator) to confirm.

  3. 3

    Service the control board

    If on utility power and FE persists, the frequency monitoring circuit on the board has failed.

    🔩 Samsung dryer control board ($100–$280)

How to Reset Error Code FE

Restore proper power source and unplug 5 minutes. Restart.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Samsung dryer reset guide → Enter diagnostic mode → Symptom guide: Dryer won't start →

Did this guide fix your appliance?

When to Call a Professional

FE on utility power without a generator indicates a control board fault.

Average professional repair cost for this issue: $200–$420

Related Error Codes

9E1
Line voltage abnormality — supply voltage out of range
⚠ Medium Severity

Same Code on Other Brands

Error code FE appears on these other brands too. See every brand that shows FE →

LG logo
LG Washing Machine FE
Water overflow error — drum overfilling
LG logo
LG Dishwasher FE
Water overflow — overfill protection triggered

Find Replacement Parts

Use these links to find the exact replacement parts for your Samsung Dryer:

🔩
Search PartSelect
Samsung Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Samsung Dryer Error Codes

tE Thermistor (temperature sensor) failure HE Heater fault — drum not heating or overheating OD Vent blockage detected bE2 Button error — a control-panel key is stuck 9C1 Power supply error — abnormal/low line voltage AC Communication error — main and sub control boards not communicating

Frequently Asked Questions

Can I keep using my Samsung Dryer when error FE appears? +
It is not advisable. The dryer may still power on, but running it while FE is active can worsen the power fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes FE on a Samsung Dryer? +
Across reported Samsung dryer repairs, the most frequent is power inverter or generator with non-standard frequency (50% of cases), faulty internal power monitoring circuit (30%), then voltage fluctuation causing frequency distortion (20%). Check them in that order before replacing any parts.
FE keeps coming back after a reset — what should I check next? +
A reset only clears the stored FE fault; if it returns, the power problem is still present. Move on to the physical checks — check power source, then test on utility power — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix Samsung Dryer error FE? +
A DIY repair typically runs $0–$280 in parts, versus $200–$420 for a professional service call, so handling it yourself saves around $200. Expect the work to take 1–3 hours.
Which Samsung Dryer models show error FE? +
FE is documented on Samsung electric and gas dryers with electronic control boards that monitor incoming AC power, broadly across recent model years. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Samsung Dryer Error Codes ← All Samsung Error Codes