ApplianceErrors.com

Samsung Dryer Error Code 9E1

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026
⚠ Medium Severity 🔧 Easy DIY Also shown as: 9E, 2E

Line voltage abnormality — supply voltage out of range

The most common cause of the 9E1 error on a Samsung dryer is low or unstable house voltage (~40% of cases); start with: remove extension cords.

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $120–$250 Save $120+ by doing it yourself
Samsung Dryer error code 9E1 on the display panel
How the 9E1 code appears on a Samsung dryer display

What Does Error Code 9E1 Mean on a Samsung Dryer?

Line voltage abnormality — supply voltage out of range.

The control board continuously monitors incoming line voltage through its power-sensing circuit. 9E1 fires when it reads voltage that is too low or fluctuating beyond the safe operating window, preventing a run to protect the motor and heater. Unlike 9C1, which flags a broadly abnormal supply, 9E1 leans toward under-voltage or instability. It is distinct from FE, which points to a line-frequency mismatch rather than a voltage-level problem, though both stem from the incoming power feed.

Models affected: Samsung electric and gas dryers with digital fault-code displays, including models such as DVE45R6100C, DVE45T6000W, DV42H5000EW, DVE50BG8300V, and DVG45T3200W
What owners report: Owners commonly report this code appearing when the dryer is plugged into an extension cord or power strip, or on a circuit shared with other heavy loads. Plugging directly into a properly wired wall outlet and power cycling often clears it; if it returns with a verified good outlet, the control board is the likely suspect.

What Causes Error Code 9E1?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Low or unstable house voltage 40% of cases
  2. 2
    Extension cord/power strip 30% of cases
  3. 3
    Loose or miswired outlet 20% of cases
  4. 4
    Control board voltage-sensing fault 10% of cases

How to Fix Samsung Dryer Error Code 9E1

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Remove extension cords

    Plug straight into the wall outlet.

  2. 2

    Power cycle

    Unplug for 5 minutes, then restart.

  3. 3

    Have the outlet checked

    An electrician should verify correct, stable voltage at the receptacle.

How to Reset Error Code 9E1

Plug directly into the wall, power cycle, and restart.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Samsung dryer reset guide → Enter diagnostic mode → Symptom guide: Dryer won't start →

Did this guide fix your appliance?

When to Call a Professional

If the outlet checks out but 9E1 persists, the control board voltage-sensing circuit has failed.

Average professional repair cost for this issue: $120–$250

Related Error Codes

9C1
Power supply error — abnormal/low line voltage
⚠ Medium Severity
FE
Frequency error — abnormal power supply frequency
⚠ High Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your Samsung Dryer:

🔩
Search PartSelect
Samsung Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Samsung Dryer Error Codes

tE Thermistor (temperature sensor) failure HE Heater fault — drum not heating or overheating OD Vent blockage detected bE2 Button error — a control-panel key is stuck AC Communication error — main and sub control boards not communicating Et Communication error — connection between boards

Frequently Asked Questions

Can I keep using my Samsung Dryer when error 9E1 appears? +
You often can for a cycle or two, but the power issue behind 9E1 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes 9E1 on a Samsung Dryer? +
Across reported Samsung dryer repairs, the most frequent is low or unstable house voltage (40% of cases), extension cord/power strip (30%), then loose or miswired outlet (20%). Check them in that order before replacing any parts.
9E1 keeps coming back after a reset — what should I check next? +
A reset only clears the stored 9E1 fault; if it returns, the power problem is still present. Move on to the physical checks — remove extension cords, then power cycle — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Samsung Dryer error 9E1? +
A DIY repair typically runs $0–$0 in parts, versus $120–$250 for a professional service call, so handling it yourself saves around $120. Expect the work to take about 10–20 minutes.
Which Samsung Dryer models show error 9E1? +
9E1 is documented on Samsung electric and gas dryers with digital fault-code displays, including models such as DVE45R6100C, DVE45T6000W, DV42H5000EW, DVE50BG8300V, and DVG45T3200W. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Samsung Dryer Error Codes ← All Samsung Error Codes