DVE45R6100C Error Codes — Samsung Dryer
🏷️ Model: DVE45R6100C 📅 Production: 2019–present 🌀 Type: Dryer
7.5 cu ft electric dryer with steam sanitize. Codes display on the front LED panel; heating element and vent codes dominate service calls.
Most Common Codes on the DVE45R6100C
HC tS tO dC
High temperature detected — overheating safety shutdown
⚠ High Severity Thermistor short circuit — temperature sensor reading too low resistance
⚠ Medium Severity Thermistor open circuit — temperature sensor disconnected or failed open
⚠ Medium Severity Door open — door detected open during operation
✓ Low Severity All Other Samsung Dryer Codes
The DVE45R6100C can also display any of the standard Samsung dryer codes:
tE Thermistor (temperature sensor) failure HE Heater fault — drum not heating or overheating OD Vent blockage detected bE2 Button error — a control-panel key is stuck 9C1 Power supply error — abnormal/low line voltage 9E1 Line voltage abnormality — supply voltage out of range AC Communication error — main and sub control boards not communicating FE Frequency error — abnormal power supply frequency Et Communication error — connection between boards bC2 Button card error — control panel communication failure AE Communication error — internal signal failure 1 AC Air circulation error — insufficient airflow detected through the drum Clg Clog warning — exhaust duct restriction detected (early D80/D90 indicator) nG No gas — burner failed to ignite (gas models) PS Duct sensor blockage — vent/moisture sensor reading abnormal due to restricted exhaust
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Samsung dryer code list.