Dryer Repair Cost Guide (2026)
Across the 73 documented dryer error codes in our database, a professional repair averages $152–$311, while fixing it yourself averages $19–$109 in parts — a typical saving of about $168. 68% of these faults are rated easy-to-moderate DIY difficulty.
Dryer Repair Cost by Problem Type
Averages computed from the error codes in each fault category. DIY = parts only; Pro = parts + labor.
| Problem Type | Codes | DIY Cost | Pro Cost |
|---|---|---|---|
| Sensor | 21 | $11–$47 | $138–$266 |
| Heating | 12 | $15–$118 | $186–$381 |
| Airflow | 11 | $0–$59 | $101–$227 |
| Control Board | 9 | $73–$274 | $236–$478 |
| Power | 4 | $0–$80 | $118–$260 |
| Motor | 4 | $53–$255 | $225–$465 |
| Control Panel | 2 | $25–$65 | $75–$150 |
| Maintenance | 2 | $0–$0 | $0–$50 |
| Temperature Sensor | 2 | $15–$35 | $130–$250 |
| Control | 2 | $0–$230 | $180–$370 |
Cost by Brand
Most Expensive Dryer Faults
F01 F26 E10 F01 F06
Whirlpool: Main control board failure
Pro: $250–$520
Whirlpool: Drive motor failure
Pro: $250–$520
GE Appliances: Motor relay failure on control board
Pro: $250–$520
Maytag: Electronic control board failure
Pro: $250–$520
Maytag: Drive motor failure — drum not turning
Pro: $250–$520
Cheapest Dryer Fixes
LS PF CL tCL D80
GE Appliances: Lint screen reminder
DIY: $0–$0
LG: Power failure — cycle interrupted
DIY: $0–$0
LG: Child lock is active — controls are locked
DIY: $0–$0
LG: Tub clean reminder — time to clean the drum and condenser (not a fault)
DIY: $0–$0
LG: Duct blockage detected — exhaust duct 80% blocked
DIY: $0–$40
Frequently Asked Questions
How much does dryer repair cost? +
Across the 73 dryer error codes in our database, professional repair averages $152–$311, while the DIY parts cost averages $19–$109. The spread depends heavily on the failed component — see the table by problem type.
Is it worth repairing a dryer myself? +
68% of documented dryer faults are rated easy or moderate DIY difficulty, and the average saving over a professional repair is about $168. Faults rated 'Call a Pro' (sealed-system, gas, high-voltage work) should not be DIY'd.
When should I replace instead of repair a dryer? +
The common rule: if the repair quote exceeds 50% of the replacement cost and the unit is past half its expected lifespan (10–13 years for most dryers), replacement usually wins. Control-board and motor failures on older units are the classic replace triggers.
Methodology: figures are averages of the per-code DIY (parts) and professional (parts + labor) cost ranges documented across 73 dryer error codes in our database, verified against manufacturer documentation and common parts pricing. Regional labor rates vary.