ApplianceErrors.com

GE Appliances Dryer Error Code E10

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Motor relay failure on control board

The most common cause of the E10 error on a GE Appliances dryer is motor relay burned on control board (~65% of cases); start with: power cycle.

💰 DIY cost: $100–$280 👨‍🔧 Pro cost: $250–$520 Save $150+ by doing it yourself
GE Appliances Dryer error code E10 on the display panel
How the E10 code appears on a GE Appliances dryer display

What Does Error Code E10 Mean on a GE Appliances Dryer?

Motor relay failure on control board.

E10 fires when the control board's self-diagnostics find the drum-motor relay is not switching as commanded — typically stuck closed or with contacts too burned to reliably make or break the motor circuit. Because the board can no longer trust its own motor control, it halts the cycle for safety. This distinguishes E10 from motor or thermal faults: the failure is on the board itself, not the motor windings, sensors, or wiring, so replacing the board is usually the fix.

Models affected: GE electronic-control dryers that use a main board with an integrated motor relay, including models such as GTD42EASJWW and GFD55ESSNWW
What owners report: Owners commonly report E10 appearing suddenly, sometimes right after a storm or power surge, with the dryer refusing to start or stopping mid-cycle. A 15-minute unplug occasionally clears a one-off glitch, but when the code returns it typically points to a burned relay and board replacement.

What Causes Error Code E10?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Motor relay burned on control board 65% of cases
  2. 2
    Power surge damaging relay 25% of cases
  3. 3
    Control board general failure 10% of cases

How to Fix GE Appliances Dryer Error Code E10

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Unplug 15 minutes.

  2. 2

    Replace control board

    E10 almost always requires board replacement.

    🔩 GE dryer control board ($100–$280)

How to Reset Error Code E10

Unplug 15 minutes. If E10 returns, board needs replacement.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Control board replacement for GE dryers is a direct swap. Photograph all wiring.

Average professional repair cost for this issue: $250–$520

Related Error Codes

E4
High-limit thermostat tripped — overheating detected
⚠ High Severity

Same Code on Other Brands

Error code E10 appears on these other brands too. See every brand that shows E10 →

Electrolux logo
Electrolux Washing Machine E10
Water inlet error — no water detected

Find Replacement Parts

Use these links to find the exact replacement parts for your GE Appliances Dryer:

🔩
Search PartSelect
GE Appliances Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More GE Appliances Dryer Error Codes

E1 Thermistor open — temperature sensor failure E3 Outlet thermistor shorted — exhaust temperature sensor failure E8 Inlet thermistor failure — intake temperature sensor E9 Exhaust thermistor failure LS Lint screen reminder E14 Stuck key on the control panel

Frequently Asked Questions

Can I keep using my GE Appliances Dryer when error E10 appears? +
It is not advisable. The dryer may still power on, but running it while E10 is active can worsen the control-board fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes E10 on a GE Appliances Dryer? +
Across reported GE Appliances dryer repairs, the most frequent is motor relay burned on control board (65% of cases), power surge damaging relay (25%), then control board general failure (10%). Check them in that order before replacing any parts.
E10 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E10 fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle, then replace control board — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix GE Appliances Dryer error E10? +
A DIY repair typically runs $100–$280 in parts, versus $250–$520 for a professional service call, so handling it yourself saves around $150. Expect the work to take 1–3 hours.
Which GE Appliances Dryer models show error E10? +
E10 is documented on GE electronic-control dryers that use a main board with an integrated motor relay, including models such as GTD42EASJWW and GFD55ESSNWW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All GE Appliances Dryer Error Codes ← All GE Appliances Error Codes