ApplianceErrors.com

Electrolux Washing Machine Error Code E10

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧 Easy DIY

Water inlet error — no water detected

The most common cause of the E10 error on a Electrolux washing machine is supply valve closed (~40% of cases); start with: check supply valves.

💰 DIY cost: $0–$75 👨‍🔧 Pro cost: $120–$250 Save $120+ by doing it yourself
Electrolux Washing Machine error code E10 on the display panel
How the E10 code appears on a Electrolux washing machine display

What Does Error Code E10 Mean on a Electrolux Washing Machine?

Water inlet error — no water detected.

E10 fires when the control board expects water during the fill step but the flow meter and pressure sensor register little or no incoming water within the allotted time. It points to a supply-side interruption — closed valves, clogged inlet screens, weak household pressure, or a failed inlet solenoid — rather than the drainage or overflow conditions that trigger E20. The board aborts fill to protect the cycle, distinguishing a no-fill fault from slow-fill or drain errors.

Models affected: Electrolux front-load washers, including models such as EFLS627UTT and ELFW7637AT, as well as related front-load series that monitor fill via a flow meter and pressure sensor
What owners report: Owners commonly report E10 appearing shortly after starting a cycle, often after plumbing work or a partially closed shutoff valve. A frequent quick win is simply reopening both hot and cold supply valves fully; clogged inlet screens are another easy fix. Low household water pressure can occasionally trigger it falsely.

What Causes Error Code E10?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Supply valve closed 40% of cases
  2. 2
    Inlet screen blocked 30% of cases
  3. 3
    Low water pressure 20% of cases
  4. 4
    Inlet valve failure 10% of cases

How to Fix Electrolux Washing Machine Error Code E10

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Check supply valves

    Both valves fully open.

  2. 2

    Clean inlet screens

    Remove hoses and clean mesh screens at washer ports.

  3. 3

    Test inlet valve

    Test solenoid continuity.

    🔩 Electrolux inlet valve ($35–$75)

How to Reset Error Code E10

Open both supply valves fully, then press Start/Pause to resume or cancel and restart the cycle. If E10 returns in the first minutes of fill, clean the inlet screens and retest.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Electrolux washer reset guide → Enter diagnostic mode → Symptom guide: Washer not filling →

Did this guide fix your appliance?

When to Call a Professional

If supply confirmed and error persists, inlet valve needs replacement.

Average professional repair cost for this issue: $120–$250

Related Error Codes

E20
Drain error — water not draining
⚠ High Severity

Same Code on Other Brands

Error code E10 appears on these other brands too. See every brand that shows E10 →

GE Appliances logo
GE Appliances Dryer E10
Motor relay failure on control board

Find Replacement Parts

Use these links to find the exact replacement parts for your Electrolux Washing Machine:

🔩
Search PartSelect
Electrolux Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Electrolux Washing Machine Error Codes

E40 Door not closed or door lock failure E50 Motor failure E90 Wiring harness fault — communication error E11 Long fill time — washer not filling during the wash phase E13 Water leak detected — level dropping when it should not E21 Drain error — water not pumping out fast enough

Frequently Asked Questions

Can I keep using my Electrolux Washing Machine when error E10 appears? +
You often can for a cycle or two, but the water-supply issue behind E10 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes E10 on a Electrolux Washing Machine? +
Across reported Electrolux washing machine repairs, the most frequent is supply valve closed (40% of cases), inlet screen blocked (30%), then low water pressure (20%). Check them in that order before replacing any parts.
E10 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E10 fault; if it returns, the water-supply problem is still present. Move on to the physical checks — check supply valves, then clean inlet screens — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Electrolux Washing Machine error E10? +
A DIY repair typically runs $0–$75 in parts, versus $120–$250 for a professional service call, so handling it yourself saves around $120. Expect the work to take about 10–20 minutes.
Which Electrolux Washing Machine models show error E10? +
E10 is documented on Electrolux front-load washers, including models such as EFLS627UTT and ELFW7637AT, as well as related front-load series that monitor fill via a flow meter and pressure sensor. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Electrolux Washing Machine Error Codes ← All Electrolux Error Codes