ApplianceErrors.com

Maytag Dryer Error Code F06

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Drive motor failure — drum not turning

The most common cause of the F06 error on a Maytag dryer is motor winding failure (~55% of cases); start with: test drive motor.

💰 DIY cost: $100–$250 👨‍🔧 Pro cost: $250–$520 Save $150+ by doing it yourself
Maytag Dryer error code F06 on the display panel
How the F06 code appears on a Maytag dryer display

What Does Error Code F06 Mean on a Maytag Dryer?

Drive motor failure — drum not turning.

The control energizes the drive motor and watches a rotation or motor-run feedback signal. When it commands the motor but detects no rotation within the expected window, it sets F06 and halts the cycle to protect the machine. Open or shorted motor windings are the usual cause, but a failed start capacitor or a tripped thermal overload on the motor mimics the same no-rotation condition. Unlike a belt or airflow fault, F06 points specifically at the drive motor circuit failing to spin the drum.

Models affected: Maytag dryers with electronic control boards that monitor drum rotation, including models such as MEDC465HW, MED7230HW, and MED4500MW
What owners report: Owners commonly report the drum humming or staying dead silent while the panel throws F06, often mid-cycle. A tripped thermal overload can be a false alarm after overheating, so letting the dryer cool and pressing any motor reset button is a frequent quick win before assuming the motor is dead.

What Causes Error Code F06?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Motor winding failure 55% of cases
  2. 2
    Start capacitor failure 30% of cases
  3. 3
    Thermal overload tripped 15% of cases

How to Fix Maytag Dryer Error Code F06

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Test drive motor

    Test motor windings for continuity.

    🔩 Multimeter
  2. 2

    Check thermal overload

    Press reset button on motor if present.

  3. 3

    Replace drive motor

    Remove drum to access motor.

    🔩 Maytag dryer drive motor ($100–$250)
    ⚠️ Unplug first.

How to Reset Error Code F06

After motor replacement, restart.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Maytag dryer reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

Drive motor replacement requires significant disassembly.

Average professional repair cost for this issue: $250–$520

Related Error Codes

F01
Electronic control board failure
⚠ High Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Dryer:

🔩
Search PartSelect
Maytag Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Dryer Error Codes

F22 Outlet thermistor (temperature sensor) failure AF Restricted airflow — blocked vent (safety shutdown) E1 Thermistor open circuit — temperature sensor failure E2 Thermistor short circuit — temperature sensor failure F24 Inlet thermistor failure — temperature sensor fault F26 Drive motor failure — drum not turning

Frequently Asked Questions

Can I keep using my Maytag Dryer when error F06 appears? +
It is not advisable. The dryer may still power on, but running it while F06 is active can worsen the motor fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F06 on a Maytag Dryer? +
Across reported Maytag dryer repairs, the most frequent is motor winding failure (55% of cases), start capacitor failure (30%), then thermal overload tripped (15%). Check them in that order before replacing any parts.
F06 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F06 fault; if it returns, the motor problem is still present. Move on to the physical checks — test drive motor, then check thermal overload — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix Maytag Dryer error F06? +
A DIY repair typically runs $100–$250 in parts, versus $250–$520 for a professional service call, so handling it yourself saves around $150. Expect the work to take 1–3 hours.
Which Maytag Dryer models show error F06? +
F06 is documented on Maytag dryers with electronic control boards that monitor drum rotation, including models such as MEDC465HW, MED7230HW, and MED4500MW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Maytag Dryer Error Codes ← All Maytag Error Codes