Maytag Dryer Error Code F01
Electronic control board failure
The most common cause of the F01 error on a Maytag dryer is board component failure (~55% of cases); start with: check the circuit breaker.
What Does Error Code F01 Mean on a Maytag Dryer?
Electronic control board failure.
The main dryer control board failed its internal self-check and can no longer run cycles reliably, so the dryer stops or won't respond to the controls. A failed onboard component is the usual cause, often triggered by a power surge; a long power cycle sometimes clears a transient fault.
What Causes Error Code F01?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Board component failure 55% of cases
- 2 Power surge damage 30% of cases
- 3 Moisture on board 15% of cases
How to Fix Maytag Dryer Error Code F01
- 1
Check the circuit breaker
Confirm the dryer has full power — a tripped half of the 240V double-pole breaker can mimic a control fault.
- 2
Power cycle the dryer
Unplug the dryer (or switch off the breaker) for 15 minutes, then restore power to clear a transient control fault.
- 3
Reseat board connectors
Unplug the dryer and reseat the wiring connectors on the control board; loose or corroded pins can trigger F01.
⚠️ Unplug before servicing. - 4
Replace the control board
If F01 returns after a power cycle, the main control board has failed and needs replacement.
🔩 Maytag dryer control board ($100–$300)⚠️ Photograph all wiring before disconnecting.
How to Reset Error Code F01
Unplug the dryer for a full 15 minutes (or switch off its breaker) so the control board discharges, then restore power. If F01 returns immediately, the board has failed and needs replacement.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
Did this guide fix your appliance?
✓ Thanks — your feedback helps us improve this guide for the next person.
Thanks for letting us know. If the steps above didn't work, see when to call a professional.
What went wrong? (one tap helps us fix this guide)
✓ Noted — we'll use this to improve the guide.
When to Call a Professional
If F01 persists after a power cycle and connector check, or returns on a new control board, a technician should test the incoming power supply and wiring harness for the real fault.
Related Error Codes
Same Code on Other Brands
Error code F01 appears on these other brands too. See every brand that shows F01 →
Find Replacement Parts
Use these links to find the exact replacement parts for your Maytag Dryer:
External links — ApplianceErrors.com is not affiliated with these retailers.
More Maytag Dryer Error Codes
Frequently Asked Questions
Can I keep using my Maytag Dryer when error F01 appears? +
What most commonly causes F01 on a Maytag Dryer? +
F01 keeps coming back after a reset — what should I check next? +
How much does it cost to fix Maytag Dryer error F01? +
Sources & References
- • Maytag Product Help — official manufacturer documentation
- • Our editorial & verification policy
Content verified against manufacturer service documentation. Last verified: June 10, 2026.