Maytag Dryer Error Code PF

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026

✓ Low Severity 🔧 Easy DIY

Power failure — cycle interrupted by loss of power

The most common cause of the PF error on a Maytag dryer is power outage or brief interruption (~60% of cases); start with: restart the cycle.

💰 DIY cost: $0–$20 👨‍🔧 Pro cost: $0–$150

Maytag Dryer error code PF on the display panel — How the PF code appears on a Maytag dryer display

What Does Error Code PF Mean on a Maytag Dryer?

Power failure — cycle interrupted by loss of power.

PF is set when the control board detects that AC power was lost and then restored while a cycle was in progress. On restoring power the board halts the cycle and displays PF to signal it did not finish, rather than silently resuming. Unlike a hardware fault code, PF reflects a supply-side interruption and clears once you restart the cycle. Persistent PF with steady house power instead points to a loose cord, terminal block, or intermittent control connection.

Models affected: Maytag electronic-control dryers with a digital display, including models such as MEDC465HW, MED7230HW, and MED4500MW

What owners report: Owners commonly report PF after a storm, a brief outage, or a breaker blip, and it usually goes away as soon as the cycle is restarted. If it keeps returning without any obvious power loss, many find the fix is reseating the power cord at the terminal block or checking the outlet.

What Causes Error Code PF?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Power outage or brief interruption 60% of cases
2

Loose power cord / outlet connection 25% of cases
3

Breaker tripped momentarily 15% of cases

How to Fix Maytag Dryer Error Code PF

🔧 Easy DIY Est. time: 10–20 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Restart the cycle

Press Start to resume or restart the cycle.
2

Check the cord and outlet

If PF recurs, ensure the power cord is fully seated and the outlet is sound.

⚠️ Unplug before checking the terminal block.
3

Check the breaker

A breaker that trips repeatedly indicates an electrical fault to investigate.

How to Reset Error Code PF

Press Start to restart the cycle. PF clears on its own.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Maytag dryer reset guide → Enter diagnostic mode → Symptom guide: Dryer won't start →

Did this guide fix your appliance?

When to Call a Professional

PF is not a fault. Call a pro only if it recurs with stable household power — that points to a loose connection or control fault.

Average professional repair cost for this issue: $0–$150

Related Error Codes

Low or no line voltage — heater cannot turn on

⚠ High Severity

Same Code on Other Brands

Error code PF appears on these other brands too. See every brand that shows PF →

LG Dryer PF

Power failure — cycle interrupted

LG Oven PF

Power failure — unit lost power during operation (not a fault)

Whirlpool Washing Machine PF

Power failure — a power interruption stopped the cycle

Whirlpool Dryer PF

Power failure — a power interruption stopped the cycle

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Dryer:

🔩

Search PartSelect

Maytag Dryer repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Dryer Error Codes

F01 Electronic control board failure F22 Outlet thermistor (temperature sensor) failure F06 Drive motor failure — drum not turning AF Restricted airflow — blocked vent (safety shutdown) E1 Thermistor open circuit — temperature sensor failure E2 Thermistor short circuit — temperature sensor failure

Frequently Asked Questions

Can I keep using my Maytag Dryer when error PF appears? +

Usually yes — PF is a low-severity power notice that rarely stops the dryer from working, but clearing the underlying cause prevents it from escalating.

What most commonly causes PF on a Maytag Dryer? +

Across reported Maytag dryer repairs, the most frequent is power outage or brief interruption (60% of cases), loose power cord / outlet connection (25%), then breaker tripped momentarily (15%). Check them in that order before replacing any parts.

PF keeps coming back after a reset — what should I check next? +

A reset only clears the stored PF fault; if it returns, the power problem is still present. Move on to the physical checks — restart the cycle, then check the cord and outlet — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.

How much does it cost to fix Maytag Dryer error PF? +

A DIY repair typically runs $0–$20 in parts, versus $0–$150 for a professional service call. Expect the work to take about 10–20 minutes.

Which Maytag Dryer models show error PF? +

PF is documented on Maytag electronic-control dryers with a digital display, including models such as MEDC465HW, MED7230HW, and MED4500MW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Maytag Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Maytag Dryer Error Codes ← All Maytag Error Codes