ApplianceErrors.com

Maytag Dryer Error Code L2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026
⚠ High Severity 🔧 Easy DIY Also shown as: LO

Low or no line voltage — heater cannot turn on

The most common cause of the L2 error on a Maytag dryer is one 240V breaker leg tripped (~45% of cases); start with: reset the circuit breaker.

💰 DIY cost: $0–$20 👨‍🔧 Pro cost: $100–$250 Save $100+ by doing it yourself
Maytag Dryer error code L2 on the display panel
How the L2 code appears on a Maytag dryer display

What Does Error Code L2 Mean on a Maytag Dryer?

Low or no line voltage — heater cannot turn on.

L2 (also shown as LO) fires when the control board senses that one of the two 240V supply legs is missing or the incoming voltage is too low to energize the heating element. The motor may still run on the surviving leg, so the drum tumbles while clothes stay cold. This distinguishes L2 from element or thermistor faults like F31, which involve the heater circuit itself rather than the incoming supply. The board is reporting a power-delivery problem external to the dryer.

Models affected: Maytag electric dryers with digital fault-code displays that monitor incoming line voltage, including models such as MEDC465HW, MED7230HW, and MED4500MW
What owners report: Owners commonly report L2 appearing when the drum spins but never heats, often after a breaker has partly tripped or following a storm or power flicker. A full off-then-on cycle of both breaker legs frequently clears it, and a loose or partially seated cord at the terminal block is a common false trigger worth checking before calling anyone.

What Causes Error Code L2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    One 240V breaker leg tripped 45% of cases
  2. 2
    Loose connection at breaker or outlet 30% of cases
  3. 3
    House wiring / supply fault 25% of cases

How to Fix Maytag Dryer Error Code L2

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Reset the circuit breaker

    Fully switch the dryer's double breaker off then on — both legs must be live.

  2. 2

    Check the outlet and cord connection

    Confirm the power cord is fully seated and the terminal block is tight.

    🔩 Multimeter
    ⚠️ Unplug before checking the terminal block.
  3. 3

    Have the supply inspected

    Persistent L2 after resetting points to a house wiring or breaker fault.

    ⚠️ Electrical supply faults should be inspected by an electrician.

How to Reset Error Code L2

Reset both legs of the breaker and restart. Check the cord and terminal block if L2 persists.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Maytag dryer reset guide → Enter diagnostic mode → Symptom guide: Dryer won't start →

Did this guide fix your appliance?

When to Call a Professional

If the breaker and cord are good and L2 persists, have an electrician check the 240V supply.

Average professional repair cost for this issue: $100–$250

Related Error Codes

F31
L2 line voltage / heating circuit fault
⚠ High Severity

Same Code on Other Brands

Error code L2 appears on these other brands too. See every brand that shows L2 →

Whirlpool logo
Whirlpool Dryer L2
Low or missing voltage on one leg of 240V supply

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Dryer:

🔩
Search PartSelect
Maytag Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Dryer Error Codes

F01 Electronic control board failure F22 Outlet thermistor (temperature sensor) failure F06 Drive motor failure — drum not turning AF Restricted airflow — blocked vent (safety shutdown) E1 Thermistor open circuit — temperature sensor failure E2 Thermistor short circuit — temperature sensor failure

Frequently Asked Questions

Can I keep using my Maytag Dryer when error L2 appears? +
It is not advisable. The dryer may still power on, but running it while L2 is active can worsen the power fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes L2 on a Maytag Dryer? +
Across reported Maytag dryer repairs, the most frequent is one 240V breaker leg tripped (45% of cases), loose connection at breaker or outlet (30%), then house wiring / supply fault (25%). Check them in that order before replacing any parts.
L2 keeps coming back after a reset — what should I check next? +
A reset only clears the stored L2 fault; if it returns, the power problem is still present. Move on to the physical checks — reset the circuit breaker, then check the outlet and cord connection — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Maytag Dryer error L2? +
A DIY repair typically runs $0–$20 in parts, versus $100–$250 for a professional service call, so handling it yourself saves around $100. Expect the work to take about 10–20 minutes.
Which Maytag Dryer models show error L2? +
L2 is documented on Maytag electric dryers with digital fault-code displays that monitor incoming line voltage, including models such as MEDC465HW, MED7230HW, and MED4500MW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Maytag Dryer Error Codes ← All Maytag Error Codes