🫧

Fisher & Paykel Washing Machine Error Codes

4 error codes with causes and step-by-step fixes

Your Fisher & Paykel washing machine uses 4 distinct error codes to flag faults before they turn into a full breakdown. The most common cluster around water supply (1), drainage (1), door (1). Of these, about 4 can usually be cleared at home without a technician, while 2 point to more serious faults that may warrant a professional. Typical repair costs on this appliance run from $0 for simple DIY fixes up to $600 for professional component replacement.

Find your code in the table below for its exact meaning, the most likely causes ranked by how often they're the culprit, a step-by-step fix, the parts you may need, and a clear call on when it's worth phoning a repair pro.

Documented Fisher & Paykel washing machine codes on this page: E4 — water inlet fault — insufficient fill; E5 — drain pump fault — drainage problem; E6 — lid switch fault — lid not detected as closed (top-load models); E2 — motor controller fault.

Code	Meaning	Severity	DIY	Est. Cost
E4	Water inlet fault — insufficient fill	⚠ Medium Severity	easy	$0–$90
E5	Drain pump fault — drainage problem	⚠ High Severity	moderate	$0–$120
E6	Lid switch fault — lid not detected as closed (top-load models)	⚠ Medium Severity	easy	$25–$60
E2	Motor controller fault	⚠ High Severity	pro only	$0–$0

⚠️ Serious Errors — Act Quickly

Drain pump fault — drainage problem

The washer control commanded drain but water is not leaving the drum at the expe…

Motor controller fault

E2 fires when the motor controller board reads abnormal feedback from the brushl…

No Code on the Display?

Start from what the washing machine is doing instead:

Washer Won't Drain Washer Won't Start Washer Not Filling With Water Washer Leaking Water Washer Shaking or Loud During Spin Washer Not Spinning 💰 Washing Machine repair costs