ApplianceErrors.com

Fisher & Paykel Washing Machine Error Code E6

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧 Easy DIY

Lid switch fault — lid not detected as closed (top-load models)

The most common cause of the E6 error on a Fisher & Paykel washing machine is lid switch actuator broken (~45% of cases); start with: inspect switch actuator.

💰 DIY cost: $25–$60 👨‍🔧 Pro cost: $120–$260 Save $95+ by doing it yourself
Fisher & Paykel Washing Machine error code E6 on the display panel
How the E6 code appears on a Fisher & Paykel washing machine display

What Does Error Code E6 Mean on a Fisher & Paykel Washing Machine?

Lid switch fault — lid not detected as closed (top-load models).

E6 fires when the control board cannot confirm the lid is fully closed through the lid switch circuit. Because agitation and high-speed spin are unsafe with an open lid, the board halts these functions until continuity is detected. It typically points to a broken actuator tab, worn switch contacts, or damaged wiring rather than a drainage or motor fault. Unlike motor or pump codes, E6 is strictly a safety-interlock signal tied to the lid position sensing path.

Models affected: Fisher & Paykel top-load washers with a lid-switch safety interlock, including models such as the WH2424P1
What owners report: Owners commonly report E6 appearing when the lid seems shut but the plastic actuator tab has cracked or bent, so the switch never engages. A quick win some describe is checking that tab and firmly closing the lid; if that clears it, the switch itself may just be intermittent and worth testing before replacing.

What Causes Error Code E6?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Lid switch actuator broken 45% of cases
  2. 2
    Lid switch contact failure 40% of cases
  3. 3
    Wiring to switch damaged 15% of cases

How to Fix Fisher & Paykel Washing Machine Error Code E6

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Inspect switch actuator

    Check the plastic tab that triggers the lid switch.

  2. 2

    Test lid switch

    Multimeter test for continuity when depressed.

    🔩 F&P lid switch ($25–$60)
  3. 3

    Replace lid switch

    Standard repair on top-load models.

How to Reset Error Code E6

After repair, close lid and restart.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Washer won't start →

Did this guide fix your appliance?

When to Call a Professional

If switch replacement doesn't resolve E6, wiring harness to the switch needs testing.

Average professional repair cost for this issue: $120–$260

Same Code on Other Brands

Error code E6 appears on these other brands too. See every brand that shows E6 →

LG logo
LG Washing Machine E6
Clutch motor error (top-load models)

Find Replacement Parts

Use these links to find the exact replacement parts for your Fisher & Paykel Washing Machine:

🔩
Search PartSelect
Fisher & Paykel Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Fisher & Paykel Washing Machine Error Codes

E4 Water inlet fault — insufficient fill E5 Drain pump fault — drainage problem E2 Motor controller fault

Frequently Asked Questions

Can I keep using my Fisher & Paykel Washing Machine when error E6 appears? +
You often can for a cycle or two, but the door issue behind E6 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes E6 on a Fisher & Paykel Washing Machine? +
Across reported Fisher & Paykel washing machine repairs, the most frequent is lid switch actuator broken (45% of cases), lid switch contact failure (40%), then wiring to switch damaged (15%). Check them in that order before replacing any parts.
E6 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E6 fault; if it returns, the door problem is still present. Move on to the physical checks — inspect switch actuator, then test lid switch — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Fisher & Paykel Washing Machine error E6? +
A DIY repair typically runs $25–$60 in parts, versus $120–$260 for a professional service call, so handling it yourself saves around $95. Expect the work to take about 10–20 minutes.
Which Fisher & Paykel Washing Machine models show error E6? +
E6 is documented on Fisher & Paykel top-load washers with a lid-switch safety interlock, including models such as the WH2424P1. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Fisher & Paykel Washing Machine Error Codes ← All Fisher & Paykel Error Codes