EFLS627UTT Error Codes — Electrolux Washing Machine
🏷️ Model: EFLS627UTT 📅 Production: 2017–2022 🫧 Type: Washing Machine
Premium front-loader with SmartBoost. Electrolux E-codes display directly; drain and door-lock codes lead service data.
Most Common Codes on the EFLS627UTT
All Other Electrolux Washing Machine Codes
The EFLS627UTT can also display any of the standard Electrolux washing machine codes:
E90 Wiring harness fault — communication error E11 Long fill time — washer not filling during the wash phase E13 Water leak detected — level dropping when it should not E21 Drain error — water not pumping out fast enough E23 Drain pump triac/relay failure on the control board E31 Pressure sensor not communicating with the control board E35 Pressure sensor indicates water overfill E41 Door open — control cannot confirm the door is shut E42 Door lock device failure — door will not lock E43 Door lock triac failure on the control board E44 Door-closed sensing fault — closure sensor not detected E45 Door lock control circuit fault on the control board E51 Drive motor triac short-circuit on the control board E52 No signal from the motor tacho generator E53 Motor control circuit fault — low voltage to the speed control E61 Insufficient heating during wash — water not reaching temperature E62 Overheating during wash — water temperature too high E66 Heating element relay failure on the main board E91 Communication error between the user interface and the main board E94 Washer configuration error — incorrect control data
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Electrolux washing machine code list.