ApplianceErrors.com

Electrolux Washing Machine Error Code E44

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧🔧 Moderate DIY

Door-closed sensing fault — closure sensor not detected

💰 DIY cost: $40–$90 👨‍🔧 Pro cost: $150–$300 Save $110+ by doing it yourself
Electrolux Washing Machine error code E44 on the display panel
How the E44 code appears on a Electrolux washing machine display

What Does Error Code E44 Mean on a Electrolux Washing Machine?

Door-closed sensing fault — closure sensor not detected.

The control did not get a valid signal from the door-closed sensing circuit. The sensor or its wiring is the typical cause; the door itself may actually be shut.

What Causes Error Code E44?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Door closure sensor faulty 50% of cases
  2. 2
    Wiring/connector to door circuit faulty 30% of cases
  3. 3
    Control board door input fault 20% of cases

How to Fix Electrolux Washing Machine Error Code E44

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Reset the washer

    Unplug one minute and retry.

  2. 2

    Inspect the door switch wiring

    Reseat the connector at the door lock/switch and check for damage.

    ⚠️ Unplug before inspecting.
  3. 3

    Replace the door lock/switch assembly

    If the sensing circuit is faulty, replace the assembly.

    🔩 Electrolux door lock assembly ($40–$90)

How to Reset Error Code E44

Unplug one minute. If E44 persists, test the door sensing circuit.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

If the door assembly tests good, the control board door input has failed.

Average professional repair cost for this issue: $150–$300

Related Error Codes

E41
Door open — control cannot confirm the door is shut
✓ Low Severity
E42
Door lock device failure — door will not lock
⚠ Medium Severity
E45
Door lock control circuit fault on the control board
⚠ High Severity

Same Code on Other Brands

Error code E44 appears on these other brands too. See every brand that shows E44 →

GE Appliances logo
GE Appliances Washing Machine E44
Motor speed sensor failure
Frigidaire logo
Frigidaire Washing Machine E44
Control board communications fault

Find Replacement Parts

Use these links to find the exact replacement parts for your Electrolux Washing Machine:

🔩
Search PartSelect
Electrolux Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Electrolux Washing Machine Error Codes

E20 Drain error — water not draining E10 Water inlet error — no water detected E40 Door not closed or door lock failure E50 Motor failure E90 Wiring harness fault — communication error E11 Long fill time — washer not filling during the wash phase

Frequently Asked Questions

Can I keep using my Electrolux Washing Machine when error E44 appears? +
You often can for a cycle or two, but the door issue behind E44 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes E44 on a Electrolux Washing Machine? +
Across reported Electrolux washing machine repairs, the most frequent is door closure sensor faulty (50% of cases), wiring/connector to door circuit faulty (30%), then control board door input fault (20%). Check them in that order before replacing any parts.
E44 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E44 fault; if it returns, the door problem is still present. Move on to the physical checks — reset the washer, then inspect the door switch wiring — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Electrolux Washing Machine error E44? +
A DIY repair typically runs $40–$90 in parts, versus $150–$300 for a professional service call, so handling it yourself saves around $110. Expect the work to take roughly 30–60 minutes.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Electrolux Washing Machine Error Codes ← All Electrolux Error Codes