ApplianceErrors.com

Frigidaire Washing Machine Error Code E44

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Control board communications fault

💰 DIY cost: $100–$280 👨‍🔧 Pro cost: $200–$420 Save $100+ by doing it yourself
Frigidaire Washing Machine error code E44 on the display panel
How the E44 code appears on a Frigidaire washing machine display

What Does Error Code E44 Mean on a Frigidaire Washing Machine?

Control board communications fault.

The control board logged a communications fault very similar to E43 — an internal board problem preventing it from managing the cycle. The board is the usual replacement.

What Causes Error Code E44?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Main control board internal communications failure 70% of cases
  2. 2
    Loose board connector/harness 20% of cases
  3. 3
    Surge or moisture damage 10% of cases

How to Fix Frigidaire Washing Machine Error Code E44

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Unplug for 5 minutes and restart.

  2. 2

    Reseat connectors

    Confirm the control board harness connectors are seated firmly.

    ⚠️ Unplug the washer first.
  3. 3

    Replace the control board

    If E44 persists, replace the control board.

    🔩 Frigidaire control board ($100–$280)

How to Reset Error Code E44

Unplug 5 minutes. If E44 returns, replace the control board.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Like E43, E44 is a board-internal fault — replace the control board if a reset doesn't clear it.

Average professional repair cost for this issue: $200–$420

Related Error Codes

E43
Control board communications fault
⚠ High Severity
E5E
Communication problem between the main and motor control boards
⚠ High Severity

Same Code on Other Brands

Error code E44 appears on these other brands too. See every brand that shows E44 →

GE Appliances logo
GE Appliances Washing Machine E44
Motor speed sensor failure
Electrolux logo
Electrolux Washing Machine E44
Door-closed sensing fault — closure sensor not detected

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Washing Machine:

🔩
Search PartSelect
Frigidaire Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Frigidaire Washing Machine Error Codes

E21 Drain time exceeded — water not draining E11 Fill time exceeded — water not filling E41 Door open — lid or door not properly closed E45 Door lock control board failure E13 Water leak in tub or air leak in the pressure-sensor air bell E23 Drain pump relay failure on the control board

Frequently Asked Questions

Can I keep using my Frigidaire Washing Machine when error E44 appears? +
It is not advisable. The washing machine may still power on, but running it while E44 is active can worsen the control-board fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes E44 on a Frigidaire Washing Machine? +
Across reported Frigidaire washing machine repairs, the most frequent is main control board internal communications failure (70% of cases), loose board connector/harness (20%), then surge or moisture damage (10%). Check them in that order before replacing any parts.
E44 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E44 fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle, then reseat connectors — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix Frigidaire Washing Machine error E44? +
A DIY repair typically runs $100–$280 in parts, versus $200–$420 for a professional service call, so handling it yourself saves around $100. Expect the work to take 1–3 hours.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Frigidaire Washing Machine Error Codes ← All Frigidaire Error Codes