ApplianceErrors.com

Frigidaire Washing Machine Error Code E41

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧🔧 Moderate DIY

Door open — lid or door not properly closed

The most common cause of the E41 error on a Frigidaire washing machine is door not fully pushed closed (~45% of cases); start with: check for obstructions.

💰 DIY cost: $25–$70 👨‍🔧 Pro cost: $150–$300 Save $125+ by doing it yourself
Frigidaire Washing Machine error code E41 on the display panel
How the E41 code appears on a Frigidaire washing machine display

What Does Error Code E41 Mean on a Frigidaire Washing Machine?

Door open — lid or door not properly closed.

The control can't confirm the door is closed and locked, so the cycle won't start or pauses mid-wash. A door not pushed fully shut, a worn or broken latch hook, or a failed lock solenoid that never reports 'locked' are the usual causes.

What Causes Error Code E41?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Door not fully pushed closed 45% of cases
  2. 2
    Latch broken or worn 30% of cases
  3. 3
    Door lock solenoid failure 25% of cases

How to Fix Frigidaire Washing Machine Error Code E41

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Check for obstructions

    Look for clothing or the door gasket caught between the door and frame stopping it from latching.

  2. 2

    Close the door firmly

    Push the door until you hear a definite click so the latch fully engages the strike.

  3. 3

    Inspect the latch

    Check the latch hook for wear or cracks that stop it seating; replace the latch assembly if damaged.

    🔩 Frigidaire door latch ($25–$70)
  4. 4

    Test the lock solenoid

    With power off, check the door lock solenoid for continuity; an open coil won't engage and report locked.

    🔩 Multimeter

How to Reset Error Code E41

Close the door firmly until it clicks and restart the cycle. If E41 returns, unplug the washer for 5 minutes, then inspect the latch and test the door lock solenoid before running a load.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Washer won't start →

Did this guide fix your appliance?

When to Call a Professional

If the door closes properly and the latch is sound but E41 persists, the door lock solenoid or the control board's lock circuit has failed and needs professional replacement.

Average professional repair cost for this issue: $150–$300

Related Error Codes

E42
Door will not unlock at the end of the cycle
⚠ Medium Severity
E43
Control board communications fault
⚠ High Severity

Same Code on Other Brands

Error code E41 appears on these other brands too. See every brand that shows E41 →

Electrolux logo
Electrolux Washing Machine E41
Door open — control cannot confirm the door is shut

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Washing Machine:

🔩
Search PartSelect
Frigidaire Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Frigidaire Washing Machine Error Codes

E21 Drain time exceeded — water not draining E11 Fill time exceeded — water not filling E45 Door lock control board failure E13 Water leak in tub or air leak in the pressure-sensor air bell E23 Drain pump relay failure on the control board E44 Control board communications fault

Frequently Asked Questions

Can I keep using my Frigidaire Washing Machine when error E41 appears? +
You often can for a cycle or two, but the door issue behind E41 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes E41 on a Frigidaire Washing Machine? +
Across reported Frigidaire washing machine repairs, the most frequent is door not fully pushed closed (45% of cases), latch broken or worn (30%), then door lock solenoid failure (25%). Check them in that order before replacing any parts.
E41 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E41 fault; if it returns, the door problem is still present. Move on to the physical checks — check for obstructions, then close the door firmly — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Frigidaire Washing Machine error E41? +
A DIY repair typically runs $25–$70 in parts, versus $150–$300 for a professional service call, so handling it yourself saves around $125. Expect the work to take roughly 30–60 minutes.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Frigidaire Washing Machine Error Codes ← All Frigidaire Error Codes