ApplianceErrors.com

Speed Queen Washing Machine Error Code E2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 👨‍🔧 Call a Pro

Motor feedback error — motor control fault

The most common cause of the E2 error on a Speed Queen washing machine is motor control board fault (~45% of cases); start with: power cycle.

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $250–$600 Save $250+ by doing it yourself
Speed Queen Washing Machine error code E2 on the display panel
How the E2 code appears on a Speed Queen washing machine display

What Does Error Code E2 Mean on a Speed Queen Washing Machine?

Motor feedback error — motor control fault.

E2 fires when the motor control system reads incorrect or missing feedback from the drive motor during a spin or agitate cycle. The board compares commanded speed against the tachometer or Hall-sensor signal; a mismatch, dropout, or out-of-range reading triggers the code. This distinguishes it from simple lid-lock or door faults, because the control has confirmed the motor is not responding as expected — pointing to the control board, motor bearings, or the harness carrying the feedback signal.

Models affected: Speed Queen top-load and front-load washers with electronic controls, including models such as TR3003WN, TR7003WN, and FF7005WN
What owners report: Owners commonly report E2 appearing at the start of spin or when the drum tries to ramp up speed, sometimes with unusual noise or a stalled tub. A power cycle occasionally clears a one-off glitch, but when the code returns it usually indicates a genuine motor, board, or wiring fault warranting service.

What Causes Error Code E2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Motor control board fault 45% of cases
  2. 2
    Motor bearing failure 35% of cases
  3. 3
    Wiring harness fault 20% of cases

How to Fix Speed Queen Washing Machine Error Code E2

👨‍🔧 Call a Pro Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Unplug 10 minutes and restart.

  2. 2

    Check motor belt (if applicable)

    Some SQ models use a belt drive.

  3. 3

    Contact Speed Queen service

    Speed Queen machines are built to last 25 years — motor faults typically warrant authorized service.

How to Reset Error Code E2

Unplug 10 minutes. If E2 returns, Speed Queen authorized service is recommended.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Washer not spinning →

Did this guide fix your appliance?

When to Call a Professional

Speed Queen's commercial heritage means complex motor faults are best handled by their dealer service network.

Average professional repair cost for this issue: $250–$600

Same Code on Other Brands

Error code E2 appears on these other brands too. See every brand that shows E2 →

Maytag logo
Maytag Dryer E2
Thermistor short circuit — temperature sensor failure
Broan-NuTone logo
Broan-NuTone Range Hood E02
Fan motor failure — motor not running
Fisher & Paykel logo
Fisher & Paykel Washing Machine E2
Motor controller fault
Haier logo
Haier Washing Machine E2
Drain error — water not draining

Find Replacement Parts

Use these links to find the exact replacement parts for your Speed Queen Washing Machine:

🔩
Search PartSelect
Speed Queen Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Speed Queen Washing Machine Error Codes

E3 Water inlet valve fault — water supply issue E8 Drain pump fault — drainage problem E5 Lid switch fault (top-load models) E1 Communication error — control board fault

Frequently Asked Questions

Can I keep using my Speed Queen Washing Machine when error E2 appears? +
It is not advisable. The washing machine may still power on, but running it while E2 is active can worsen the motor fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes E2 on a Speed Queen Washing Machine? +
Across reported Speed Queen washing machine repairs, the most frequent is motor control board fault (45% of cases), motor bearing failure (35%), then wiring harness fault (20%). Check them in that order before replacing any parts.
E2 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E2 fault; if it returns, the motor problem is still present. Move on to the physical checks — power cycle, then check motor belt (if applicable) — since the code will reappear until the root cause is resolved. This is a repair most owners hand to a technician.
How much does it cost to fix Speed Queen Washing Machine error E2? +
A DIY repair typically runs $0–$0 in parts, versus $250–$600 for a professional service call, so handling it yourself saves around $250. Expect the work to take a full service visit.
Which Speed Queen Washing Machine models show error E2? +
E2 is documented on Speed Queen top-load and front-load washers with electronic controls, including models such as TR3003WN, TR7003WN, and FF7005WN. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Speed Queen Washing Machine Error Codes ← All Speed Queen Error Codes