Speed Queen Washing Machine Error Code E1

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

⚠ Medium Severity 🔧🔧🔧 Advanced DIY

Communication error — control board fault

The most common cause of the E1 error on a Speed Queen washing machine is main control board fault (~55% of cases); start with: power cycle.

💰 DIY cost: $100–$250 👨‍🔧 Pro cost: $250–$520 Save $150+ by doing it yourself

Speed Queen Washing Machine error code E1 on the display panel — How the E1 code appears on a Speed Queen washing machine display

What Does Error Code E1 Mean on a Speed Queen Washing Machine?

Communication error — control board fault.

E1 fires when the main control board fails to establish or maintain a data link with the user-interface module or another sub-module during startup or a cycle. The controller expects a valid response over the communication line; when messages time out or arrive corrupted, it flags E1. Unlike E2, which points to a related communication or control fault, E1 specifically signals that the primary controller-to-interface handshake failed, often from a loose harness or a degraded board.

Models affected: Speed Queen electronic-control (touch or dial-with-display) washers with a separate control board and user interface module, including models such as TR3003WN, TR7003WN, and FF7005WN

What owners report: Owners commonly report E1 appearing at power-up or mid-cycle, sometimes after a power surge or brownout. A simple ten-minute unplug clears many one-off cases, and reseating the interface harness connectors resolves others; if it keeps returning, the board is usually the culprit.

What Causes Error Code E1?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Main control board fault 55% of cases
2

User interface wiring disconnected 30% of cases
3

Control board damaged 15% of cases

How to Fix Speed Queen Washing Machine Error Code E1

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Power cycle

Unplug 10 minutes and restart.
2

Check wiring harness connectors

Reseat all connectors on the control board.
3

Replace control board

If power cycle and connections don't resolve it.

🔩 Speed Queen control board ($100–$250)

How to Reset Error Code E1

Unplug 10 minutes. If E1 returns, contact Speed Queen authorized service.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Speed Queen machines are repairable for life — authorized dealers stock parts for decades.

Average professional repair cost for this issue: $250–$520

Related Error Codes

Motor feedback error — motor control fault

⚠ High Severity

Same Code on Other Brands

Error code E1 appears on these other brands too. See every brand that shows E1 →

LG Dryer F9

Thermistor failure — temperature sensor not reading

LG Dishwasher AE

Leakage detected — water found in base tray

GE Appliances Dryer E1

Thermistor open — temperature sensor failure

Maytag Dryer E1

Thermistor open circuit — temperature sensor failure

Find Replacement Parts

Use these links to find the exact replacement parts for your Speed Queen Washing Machine:

🔩

Search PartSelect

Speed Queen Washing Machine repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Speed Queen Washing Machine Error Codes

E3 Water inlet valve fault — water supply issue E8 Drain pump fault — drainage problem E5 Lid switch fault (top-load models)

Frequently Asked Questions

Can I keep using my Speed Queen Washing Machine when error E1 appears? +

You often can for a cycle or two, but the control-board issue behind E1 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes E1 on a Speed Queen Washing Machine? +

Across reported Speed Queen washing machine repairs, the most frequent is main control board fault (55% of cases), user interface wiring disconnected (30%), then control board damaged (15%). Check them in that order before replacing any parts.

E1 keeps coming back after a reset — what should I check next? +

A reset only clears the stored E1 fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle, then check wiring harness connectors — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.

How much does it cost to fix Speed Queen Washing Machine error E1? +

A DIY repair typically runs $100–$250 in parts, versus $250–$520 for a professional service call, so handling it yourself saves around $150. Expect the work to take 1–3 hours.

Which Speed Queen Washing Machine models show error E1? +

E1 is documented on Speed Queen electronic-control (touch or dial-with-display) washers with a separate control board and user interface module, including models such as TR3003WN, TR7003WN, and FF7005WN. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Speed Queen Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Speed Queen Washing Machine Error Codes ← All Speed Queen Error Codes