Frigidaire Oven Error Code F11

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY

Shorted key — button stuck or shorted

The most common cause of the F11 error on a Frigidaire oven is stuck button from grease or moisture (~55% of cases); start with: clean control panel.

💰 DIY cost: $0–$150 👨‍🔧 Pro cost: $150–$320 Save $150+ by doing it yourself

Frigidaire Oven error code F11 on the display panel — How the F11 code appears on a Frigidaire oven display

What Does Error Code F11 Mean on a Frigidaire Oven?

Shorted key — button stuck or shorted.

F11 fires when the electronic oven control (EOC) reads a keypad input as continuously closed, as if a button is held down. The board scans the membrane keypad's row/column matrix; a shorted or stuck line makes it register a permanent press, locking out normal commands. This differs from F10, which signals a runaway or over-temperature condition sensed at the temperature probe rather than a keypad fault. The trouble lies in the keypad membrane or its ribbon connection to the control board.

Models affected: Frigidaire electric and gas ranges/wall ovens with membrane keypad control panels; the code can appear across the line, including models such as FCRE3052AS and FGGH3047VF

What owners report: Owners commonly report F11 appearing after spills, steam, or grease build-up near the touchpad, and a simple wipe-down plus a 10-minute power cycle sometimes clears it. If the same key keeps triggering the code after cleaning, most find the membrane keypad itself has failed and needs replacing.

What Causes Error Code F11?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Stuck button from grease or moisture 55% of cases
2

Membrane keypad failure 35% of cases
3

Control board keypad interface failure 10% of cases

How to Fix Frigidaire Oven Error Code F11

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Clean control panel

Clean around all buttons with dry cloth. Check for sticky residue.
2

Power cycle

Unplug 10 minutes and restart.
3

Replace keypad

If a button remains stuck, replace the membrane keypad.

🔩 Frigidaire oven keypad ($50–$150)

How to Reset Error Code F11

Unplug 10 minutes. If F11 returns on the same key, that key is shorted.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Frigidaire oven reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If keypad replacement doesn't resolve F11, the control board has a shorted keypad input.

Average professional repair cost for this issue: $150–$320

Related Error Codes

F10

Runaway temperature — oven overheating

🛑 Critical — Stop Using

Same Code on Other Brands

Error code F11 appears on these other brands too. See every brand that shows F11 →

LG Oven F11

Heat error — oven failed to reach temperature in time

LG Microwave F-11

Shorted key on control panel

Miele Washing Machine F11

Pump fault — water not draining

Miele Dishwasher F11

Drainage fault — water not pumped out

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Oven:

🔩

Search PartSelect

Frigidaire Oven repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Frigidaire Oven Error Codes

F30 Oven temperature probe failure — open circuit F31 Oven temperature probe short circuit F90 Door latch failure — lock motor did not reach locked position F91 Door latch failure — lock motor did not reach unlocked position F13 Control board internal checksum error F14 EEPROM error — control board memory fault

Frequently Asked Questions

Can I keep using my Frigidaire Oven when error F11 appears? +

You often can for a cycle or two, but the control-panel issue behind F11 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F11 on a Frigidaire Oven? +

Across reported Frigidaire oven repairs, the most frequent is stuck button from grease or moisture (55% of cases), membrane keypad failure (35%), then control board keypad interface failure (10%). Check them in that order before replacing any parts.

F11 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F11 fault; if it returns, the control-panel problem is still present. Move on to the physical checks — clean control panel, then power cycle — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Frigidaire Oven error F11? +

A DIY repair typically runs $0–$150 in parts, versus $150–$320 for a professional service call, so handling it yourself saves around $150. Expect the work to take roughly 30–60 minutes.

Which Frigidaire Oven models show error F11? +

F11 is documented on Frigidaire electric and gas ranges/wall ovens with membrane keypad control panels; the code can appear across the line, including models such as FCRE3052AS and FGGH3047VF. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Frigidaire Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Frigidaire Oven Error Codes ← All Frigidaire Error Codes