ApplianceErrors.com

Frigidaire Oven Error Code F14

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

EEPROM error — control board memory fault

The most common cause of the F14 error on a Frigidaire oven is power surge corrupting EEPROM data (~55% of cases); start with: power cycle.

💰 DIY cost: $100–$280 👨‍🔧 Pro cost: $250–$500 Save $150+ by doing it yourself
Frigidaire Oven error code F14 on the display panel
How the F14 code appears on a Frigidaire oven display

What Does Error Code F14 Mean on a Frigidaire Oven?

EEPROM error — control board memory fault.

F14 fires when the ERC's self-check finds that data read back from its non-volatile EEPROM does not match expected values — the memory holding calibration and configuration has become corrupted or unreadable. Unlike F13, which flags a broader control-board or ROM/checksum fault, F14 points specifically to the EEPROM storage. The board cannot trust its stored settings, so it halts operation. A brief power cycle sometimes clears a transient glitch, but a persistent F14 means the board itself needs replacement.

Models affected: Frigidaire electronic-control (ERC) ovens and ranges with EEPROM-equipped control boards, including models such as FCRE3052AS and FGGH3047VF
What owners report: Owners commonly report F14 appearing after a power outage, storm, or breaker trip rather than during normal cooking. A 15-minute power cycle at the breaker occasionally clears it for good; when the code returns quickly, most people find the control board has to be replaced.

What Causes Error Code F14?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Power surge corrupting EEPROM data 55% of cases
  2. 2
    ERC board age/failure 35% of cases
  3. 3
    Intermittent power causing incomplete write cycles 10% of cases

How to Fix Frigidaire Oven Error Code F14

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Turn off circuit breaker for 15 minutes.

  2. 2

    Replace the ERC control board

    F14 is a board-level EEPROM fault and cannot be repaired by resetting alone.

    🔩 Frigidaire oven ERC board ($100–$280)
    ⚠️ Photograph all wiring before disconnecting.

How to Reset Error Code F14

Turn off circuit breaker 15 minutes. If F14 returns, replace ERC board.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Frigidaire oven reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

Replace the ERC board. This is not a DIY repair unless you are comfortable with oven electronics.

Average professional repair cost for this issue: $250–$500

Related Error Codes

F13
Control board internal checksum error
⚠ High Severity

Same Code on Other Brands

Error code F14 appears on these other brands too. See every brand that shows F14 →

Miele logo
Miele Dishwasher F14
Heater pressure switch fault
Electrolux logo
Electrolux Oven F14
Display/touch panel not communicating with the control

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Oven:

🔩
Search PartSelect
Frigidaire Oven repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Frigidaire Oven Error Codes

F10 Runaway temperature — oven overheating F30 Oven temperature probe failure — open circuit F11 Shorted key — button stuck or shorted F31 Oven temperature probe short circuit F90 Door latch failure — lock motor did not reach locked position F91 Door latch failure — lock motor did not reach unlocked position

Frequently Asked Questions

Can I keep using my Frigidaire Oven when error F14 appears? +
It is not advisable. The oven may still power on, but running it while F14 is active can worsen the control-board fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F14 on a Frigidaire Oven? +
Across reported Frigidaire oven repairs, the most frequent is power surge corrupting EEPROM data (55% of cases), eRC board age/failure (35%), then intermittent power causing incomplete write cycles (10%). Check them in that order before replacing any parts.
F14 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F14 fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle, then replace the ERC control board — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix Frigidaire Oven error F14? +
A DIY repair typically runs $100–$280 in parts, versus $250–$500 for a professional service call, so handling it yourself saves around $150. Expect the work to take 1–3 hours.
Which Frigidaire Oven models show error F14? +
F14 is documented on Frigidaire electronic-control (ERC) ovens and ranges with EEPROM-equipped control boards, including models such as FCRE3052AS and FGGH3047VF. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Frigidaire Oven Error Codes ← All Frigidaire Error Codes