Frigidaire Oven Error Code F10

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

🛑 Critical — Stop Using 👨‍🔧 Call a Pro

Runaway temperature — oven overheating

The most common cause of the F10 error on a Frigidaire oven is oven temperature probe failure causing uncontrolled heating (~50% of cases); start with: stop oven use immediately.

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $250–$600 Save $250+ by doing it yourself

Frigidaire Oven error code F10 on the display panel — How the F10 code appears on a Frigidaire oven display

What Does Error Code F10 Mean on a Frigidaire Oven?

Runaway temperature — oven overheating.

F10 fires when the control board reads oven cavity temperature climbing beyond the safe setpoint, indicating heat it can no longer regulate. The board compares the RTD probe's resistance against expected values; an open or drifting probe reads as low temperature, so the board keeps calling for heat, or a welded relay keeps the element energized regardless of the probe. Unlike F30/F11 probe-circuit faults that flag a sensor reading fault, F10 signals actual runaway heating and demands the oven be shut down.

Models affected: Frigidaire electric and gas ranges/wall ovens using the standard F-series fault codes, including models such as FCRE3052AS and FGGH3047VF

What owners report: Owners commonly report F10 appearing mid-bake or during preheat, sometimes with the oven noticeably hotter than the set temperature. A probe that has drifted out of spec is a frequent culprit, and some report the code clearing after a probe replacement; however, because a stuck relay can keep heating even when powered off at the panel, cutting power at the breaker until diagnosed is the safest quick step.

What Causes Error Code F10?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Oven temperature probe failure causing uncontrolled heating 50% of cases
2

Stuck relay on control board 30% of cases
3

Runaway heating element 20% of cases

How to Fix Frigidaire Oven Error Code F10

👨‍🔧 Call a Pro Est. time: 1–3 hours

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Stop oven use immediately

Do not use the oven until the fault is diagnosed.

⚠️ FIRE HAZARD — stop oven use immediately.
2

Test the oven temperature probe

The probe should read ~1,100 ohms at room temperature. Out of spec = replace.

🔩 Frigidaire oven probe ($25–$55)
3

Replace control board if probe is OK

If probe tests fine, the board's temperature control relay has stuck.

🔩 Frigidaire oven control board ($100–$280)

How to Reset Error Code F10

Do not reset and continue using. Diagnose the underlying cause first.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Frigidaire oven reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

F10 is a safety event. Professional diagnosis required before returning the oven to service.

Average professional repair cost for this issue: $250–$600

Related Error Codes

F30

Oven temperature probe failure — open circuit

⚠ Medium Severity

F11

Shorted key — button stuck or shorted

⚠ Medium Severity

Same Code on Other Brands

Error code F10 appears on these other brands too. See every brand that shows F10 →

Samsung Microwave F-10

Thermistor shorted — over-temperature protection

Kenmore Oven F10

Runaway temperature detected

Electrolux Oven F10

Runaway temperature detected

Miele Oven F10

Water intake fault (steam/combi models)

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Oven:

🔩

Search PartSelect

Frigidaire Oven repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Frigidaire Oven Error Codes

F31 Oven temperature probe short circuit F90 Door latch failure — lock motor did not reach locked position F91 Door latch failure — lock motor did not reach unlocked position F13 Control board internal checksum error F14 EEPROM error — control board memory fault F12 Electronic control identification / ROM fault

Frequently Asked Questions

Can I keep using my Frigidaire Oven when error F10 appears? +

No — stop using the oven right away. F10 is a critical safety fault, and continuing to run it risks further damage or a safety hazard. Unplug it and resolve the fault before the next cycle.

What most commonly causes F10 on a Frigidaire Oven? +

Across reported Frigidaire oven repairs, the most frequent is oven temperature probe failure causing uncontrolled heating (50% of cases), stuck relay on control board (30%), then runaway heating element (20%). Check them in that order before replacing any parts.

F10 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F10 fault; if it returns, the safety problem is still present. Move on to the physical checks — stop oven use immediately, then test the oven temperature probe — since the code will reappear until the root cause is resolved. This is a repair most owners hand to a technician.

How much does it cost to fix Frigidaire Oven error F10? +

A DIY repair typically runs $0–$0 in parts, versus $250–$600 for a professional service call, so handling it yourself saves around $250. Expect the work to take a full service visit.

Which Frigidaire Oven models show error F10? +

F10 is documented on Frigidaire electric and gas ranges/wall ovens using the standard F-series fault codes, including models such as FCRE3052AS and FGGH3047VF. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Frigidaire Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Frigidaire Oven Error Codes ← All Frigidaire Error Codes