ApplianceErrors.com

Frigidaire Oven Error Code F13

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Control board internal checksum error

The most common cause of the F13 error on a Frigidaire oven is power surge corrupting board EEPROM (~50% of cases); start with: power cycle.

💰 DIY cost: $100–$280 👨‍🔧 Pro cost: $250–$500 Save $150+ by doing it yourself
Frigidaire Oven error code F13 on the display panel
How the F13 code appears on a Frigidaire oven display

What Does Error Code F13 Mean on a Frigidaire Oven?

Control board internal checksum error.

F13 fires when the ERC board runs its startup memory self-check and the result fails the internal checksum, meaning the stored program or EEPROM data no longer matches its expected verification value. The board flags corrupted memory rather than a bad sensor or relay, which is why it differs from temperature-sensor faults like F10 or F30. Common triggers include power surges or brown-outs scrambling the EEPROM, general board degradation, or an unstable power-supply connection feeding the board.

Models affected: Frigidaire electric and gas ranges/ovens using an Electronic Range Control (ERC) board, including models such as FCRE3052AS and FGGH3047VF; the code applies broadly across ERC-equipped Frigidaire ovens regardless of fuel type.
What owners report: Owners commonly report F13 appearing suddenly, often after a storm, power outage, or flickering lights, sometimes with the oven becoming unresponsive. A full breaker power-cycle occasionally clears a one-time transient, but when the code returns it usually points to a failed board that needs replacing.

What Causes Error Code F13?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Power surge corrupting board EEPROM 50% of cases
  2. 2
    Control board general failure 35% of cases
  3. 3
    Loose connection on board power supply 15% of cases

How to Fix Frigidaire Oven Error Code F13

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Turn off circuit breaker for 15 minutes. On rare occasions, a transient F13 from a brown-out clears with a full power cycle.

  2. 2

    Check wiring connections to board

    Disconnect all ribbon cables and wiring harnesses from the ERC board, then reseat them. Loose connections can cause erratic board behavior.

  3. 3

    Replace the ERC control board

    F13 is almost always a board failure. The ERC board sits behind the control panel — remove the back service panel or the front control panel depending on the model.

    🔩 Frigidaire oven ERC board ($100–$280)
    ⚠️ Photograph all wiring before disconnecting.

How to Reset Error Code F13

Turn off circuit breaker 15 minutes. If F13 returns, ERC board must be replaced.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Frigidaire oven reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

Control board replacement involves handling multiple high-voltage connections. Professional installation recommended if you are not comfortable with appliance electronics.

Average professional repair cost for this issue: $250–$500

Related Error Codes

F10
Runaway temperature — oven overheating
🛑 Critical — Stop Using
F30
Oven temperature probe failure — open circuit
⚠ Medium Severity

Same Code on Other Brands

Error code F13 appears on these other brands too. See every brand that shows F13 →

Miele logo
Miele Dishwasher F13
Water intake fault — dishwasher not filling
Electrolux logo
Electrolux Oven F13
Control board internal checksum/EEPROM error

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Oven:

🔩
Search PartSelect
Frigidaire Oven repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Frigidaire Oven Error Codes

F11 Shorted key — button stuck or shorted F31 Oven temperature probe short circuit F90 Door latch failure — lock motor did not reach locked position F91 Door latch failure — lock motor did not reach unlocked position F14 EEPROM error — control board memory fault F12 Electronic control identification / ROM fault

Frequently Asked Questions

Can I keep using my Frigidaire Oven when error F13 appears? +
It is not advisable. The oven may still power on, but running it while F13 is active can worsen the control-board fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F13 on a Frigidaire Oven? +
Across reported Frigidaire oven repairs, the most frequent is power surge corrupting board EEPROM (50% of cases), control board general failure (35%), then loose connection on board power supply (15%). Check them in that order before replacing any parts.
F13 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F13 fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle, then check wiring connections to board — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix Frigidaire Oven error F13? +
A DIY repair typically runs $100–$280 in parts, versus $250–$500 for a professional service call, so handling it yourself saves around $150. Expect the work to take 1–3 hours.
Which Frigidaire Oven models show error F13? +
F13 is documented on Frigidaire electric and gas ranges/ovens using an Electronic Range Control (ERC) board, including models such as FCRE3052AS and FGGH3047VF; the code applies broadly across ERC-equipped Frigidaire ovens regardless of fuel type.. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Frigidaire Oven Error Codes ← All Frigidaire Error Codes