Miele Dishwasher Error Code F11

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

⚠ High Severity 🔧🔧 Moderate DIY

Drainage fault — water not pumped out

The most common cause of the F11 error on a Miele dishwasher is filter/sump clogged (~50% of cases); start with: clean the filters.

💰 DIY cost: $0–$160 👨‍🔧 Pro cost: $200–$400 Save $200+ by doing it yourself

Miele Dishwasher error code F11 on the display panel — How the F11 code appears on a Miele dishwasher display

What Does Error Code F11 Mean on a Miele Dishwasher?

Drainage fault — water not pumped out.

F11 fires when the control commands the drain pump but the sump's water level fails to fall within the expected time window, so the cycle stops with standing water in the tub. The board monitors level via the drain circuit rather than a specific pump fault, which is why a clogged filter combination triggers it as readily as a failing pump. This distinguishes F11 from inlet or overfill faults, which report an unexpected rise in water instead of a stalled drop.

Models affected: Miele dishwashers across recent generations, including the G 7000 Series, as well as earlier fully integrated and freestanding models that share the sump-and-filter drainage design.

What owners report: Owners commonly report F11 appearing mid-cycle with a puddle left in the base, and cleaning the coarse and fine filters plus clearing food debris from the sump often resolves it. A kinked or improperly looped drain hose after the unit was moved is a frequent false trigger, so it's worth checking before suspecting the pump.

What Causes Error Code F11?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Filter/sump clogged 50% of cases
2

Drain hose kinked 25% of cases
3

Drain pump failure 25% of cases

How to Fix Miele Dishwasher Error Code F11

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Clean the filters

Miele dishwashers have a fine filter and coarse filter. Remove and clean both.
2

Check drain hose

Ensure proper high-loop installation and no kinks.
3

Test drain pump

If filter and hose are clear, pump may have failed.

🔩 Miele drain pump ($80–$160)

How to Reset Error Code F11

Clean the filters and check the drain hose, then switch the dishwasher off at the unit, wait about 60 seconds, switch it back on, and restart on a short program — the fault clears once the sump drains normally.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Dishwasher not draining →

Did this guide fix your appliance?

When to Call a Professional

Miele drain pump replacement is best handled by authorized service.

Average professional repair cost for this issue: $200–$400

Related Error Codes

F13

Water intake fault — dishwasher not filling

⚠ Medium Severity

Same Code on Other Brands

Error code F11 appears on these other brands too. See every brand that shows F11 →

LG Oven F11

Heat error — oven failed to reach temperature in time

LG Microwave F-11

Shorted key on control panel

Frigidaire Oven F11

Shorted key — button stuck or shorted

Electrolux Oven F11

Shorted keypad key detected

Find Replacement Parts

Use these links to find the exact replacement parts for your Miele Dishwasher:

🔩

Search PartSelect

Miele Dishwasher repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Miele Dishwasher Error Codes

F15 Heating issue — water not heating to target temperature F70 Flow meter fault — water quantity sensor failure F12 Water intake fault at the start of a step F14 Heater pressure switch fault F24 Heating circuit fault — heater relay or temperature sensor F78 Circulation pump / frequency converter fault

Frequently Asked Questions

Can I keep using my Miele Dishwasher when error F11 appears? +

It is not advisable. The dishwasher may still power on, but running it while F11 is active can worsen the drainage fault or damage related parts. Treat it as a soon-as-possible repair.

What most commonly causes F11 on a Miele Dishwasher? +

Across reported Miele dishwasher repairs, the most frequent is filter/sump clogged (50% of cases), drain hose kinked (25%), then drain pump failure (25%). Check them in that order before replacing any parts.

F11 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F11 fault; if it returns, the drainage problem is still present. Move on to the physical checks — clean the filters, then check drain hose — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Miele Dishwasher error F11? +

A DIY repair typically runs $0–$160 in parts, versus $200–$400 for a professional service call, so handling it yourself saves around $200. Expect the work to take roughly 30–60 minutes.

Which Miele Dishwasher models show error F11? +

F11 is documented on Miele dishwashers across recent generations, including the G 7000 Series, as well as earlier fully integrated and freestanding models that share the sump-and-filter drainage design.. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Miele Customer Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Miele Dishwasher Error Codes ← All Miele Error Codes