DW80R5060US Error Codes — Samsung Dishwasher
🏷️ Model: DW80R5060US 📅 Production: 2019–present 🍽️ Type: Dishwasher
Popular StormWash model. The leak-sensor LC code is the single most common complaint on this platform — often triggered by detergent overflow rather than a real leak.
Most Common Codes on the DW80R5060US
LC OC 4C 5C HC
Leak sensor activated — water detected at base of dishwasher
⚠ High Severity Over-level water error — too much water in the tub
⚠ High Severity Water supply error — dishwasher not filling
⚠ Medium Severity Drain failure — water not draining from dishwasher
⚠ High Severity High temperature heater error — water overheating detected
⚠ High Severity All Other Samsung Dishwasher Codes
The DW80R5060US can also display any of the standard Samsung dishwasher codes:
3C Wash motor error — circulation pump failure HE Heater error — water not heating tE Temperature sensor failure — NTC thermistor fault 7E Water wall reflector error — water wall sensor blocked 1E Water inlet sensor failure bE2 Button error — control panel button shorted 9E Low water level error — dishwasher not filling enough bE Button error — a control-panel key is stuck or shorted AP Access Point mode — Wi-Fi pairing, not a fault nE Noise sensor error — abnormal sound/vibration signal from the wash system PC Pump/zone wash fault — distribution motor or pump circuit error C5 Drain-related sensor fault — drainage not confirmed by the water level sensor
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Samsung dishwasher code list.