ApplianceErrors.com

Samsung Dishwasher Error Code AP

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
Low Severity 🔧 Easy DIY Also shown as: AP Mode

Access Point mode — Wi-Fi pairing, not a fault

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $0–$0
Samsung Dishwasher error code AP on the display panel
How the AP code appears on a Samsung dishwasher display

What Does Error Code AP Mean on a Samsung Dishwasher?

Access Point mode — Wi-Fi pairing, not a fault.

AP indicates the dishwasher has entered Access Point (smart-pairing) mode so it can be connected to your home Wi-Fi through the SmartThings app. This is a normal connectivity state, not a malfunction — the dishwasher is broadcasting a temporary setup network. It typically appears when you start Wi-Fi setup or hold the connectivity button.

What Causes Error Code AP?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Wi-Fi/SmartThings pairing intentionally started 70% of cases
  2. 2
    Connectivity button held long enough to enter AP mode 25% of cases
  3. 3
    Display showing AP after a power event during pairing 5% of cases

How to Fix Samsung Dishwasher Error Code AP

🔧 Easy DIY Est. time: 10–20 min
Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Complete or cancel pairing

    Finish the SmartThings Wi-Fi setup to connect, or press the connectivity/Smart Control button to exit AP mode.

  2. 2

    Power cycle to clear

    If you don't want to connect, unplug for 1 minute; the dishwasher returns to normal operation.

How to Reset Error Code AP

Either finish Wi-Fi setup in the SmartThings app or press the Smart Control button to leave AP mode. No repair is needed.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

AP is not a fault — a service call is unnecessary. Contact support only if the dishwasher will not exit AP mode after a power cycle.

Average professional repair cost for this issue: $0–$0

Find Replacement Parts

Use these links to find the exact replacement parts for your Samsung Dishwasher:

External links — ApplianceErrors.com is not affiliated with these retailers.

More Samsung Dishwasher Error Codes

Frequently Asked Questions

Can I keep using my Samsung Dishwasher when error AP appears? +
Usually yes — AP is a low-severity normal notice that rarely stops the dishwasher from working, but clearing the underlying cause prevents it from escalating.
What most commonly causes AP on a Samsung Dishwasher? +
Across reported Samsung dishwasher repairs, the most frequent is wi-Fi/SmartThings pairing intentionally started (70% of cases), connectivity button held long enough to enter AP mode (25%), then display showing AP after a power event during pairing (5%). Check them in that order before replacing any parts.
AP keeps coming back after a reset — what should I check next? +
A reset only clears the stored AP fault; if it returns, the normal problem is still present. Move on to the physical checks — complete or cancel pairing, then power cycle to clear — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Samsung Dishwasher error AP? +
A DIY repair typically runs $0–$0 in parts, versus $0–$0 for a professional service call. Expect the work to take about 10–20 minutes.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.