ApplianceErrors.com
🍽️

Samsung Dishwasher Error Codes

17 error codes with causes and step-by-step fixes

Your Samsung dishwasher uses 17 distinct error codes to flag faults before they turn into a full breakdown. The most common cluster around sensor (3), water supply (3), drainage (2). Of these, about 17 can usually be cleared at home without a technician, while 7 point to more serious faults that may warrant a professional. Typical repair costs on this appliance run from $0 for simple DIY fixes up to $450 for professional component replacement.

Find your code in the table below for its exact meaning, the most likely causes ranked by how often they're the culprit, a step-by-step fix, the parts you may need, and a clear call on when it's worth phoning a repair pro.

Code Meaning
LC Leak sensor activated — water detected at base of dishwasher
5C Drain failure — water not draining from dishwasher
3C Wash motor error — circulation pump failure
HE Heater error — water not heating
tE Temperature sensor failure — NTC thermistor fault
7E Water wall reflector error — water wall sensor blocked
1E Water inlet sensor failure
bE2 Button error — control panel button shorted
9E Low water level error — dishwasher not filling enough
bE Button error — a control-panel key is stuck or shorted
AP Access Point mode — Wi-Fi pairing, not a fault
nE Noise sensor error — abnormal sound/vibration signal from the wash system
PC Pump/zone wash fault — distribution motor or pump circuit error
C5 Drain-related sensor fault — drainage not confirmed by the water level sensor
4C Water supply error — dishwasher not filling
HC High temperature heater error — water overheating detected
OC Over-level water error — too much water in the tub

⚠️ Serious Errors — Act Quickly

No Code on the Display?

Start from what the dishwasher is doing instead: