ApplianceErrors.com

Whirlpool Oven Error Code F2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧 Moderate DIY

Oven temperature too high — over-temperature fault

💰 DIY cost: $20–$380 👨‍🔧 Pro cost: $200–$500 Save $180+ by doing it yourself
Whirlpool Oven error code F2 on the display panel
How the F2 code appears on a Whirlpool oven display

What Does Error Code F2 Mean on a Whirlpool Oven?

Oven temperature too high — over-temperature fault.

A two-digit F2 indicates the Electronic Range Control sensed the oven temperature climbing too high. The control aborts heating to protect the oven. A shorted oven temperature sensor, a relay welded closed feeding the bake/broil element, or a control fault are the usual causes. Treat a true runaway temperature as a safety issue.

What Causes Error Code F2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Oven temperature sensor (RTD) shorted, reading low 40% of cases
  2. 2
    Bake/broil relay welded closed on the control 35% of cases
  3. 3
    Control board fault 25% of cases

How to Fix Whirlpool Oven Error Code F2

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Turn off the circuit breaker for 5 minutes, then restore power.

  2. 2

    Test the oven temperature sensor

    Check the RTD sensor resistance — roughly 1080–1100 ohms at room temperature; a shorted/low reading causes over-temp.

    🔩 Multimeter 🔩 Whirlpool oven temperature sensor ($20–$50)
    ⚠️ Unplug oven before servicing.
  3. 3

    Replace the control board

    If the sensor is good but an element stays powered, a welded relay on the ERC board is the cause.

    🔩 Whirlpool ERC board ($150–$380)
    ⚠️ Unplug oven before servicing — do not keep operating an oven that overheats.

How to Reset Error Code F2

Turn off the breaker for 5 minutes. If F2 returns or the oven overheats, stop using it and have the sensor and control board checked.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

An oven that actually overheats is a safety hazard. If a power cycle does not clear F2, stop using the oven until the sensor and control board are diagnosed.

Average professional repair cost for this issue: $200–$500

Related Error Codes

F3
Open oven temperature sensor — sensor circuit open
⚠ Medium Severity
F4
Shorted oven temperature sensor — sensor reading short
⚠ Medium Severity

Same Code on Other Brands

Error code F2 appears on these other brands too. See every brand that shows F2 →

LG logo
LG Oven F2
Oven over-temperature — exceeded maximum safe temperature
GE Appliances logo
GE Appliances Oven F2
Oven over-temperature — exceeded 590°F in bake or 990°F in self-clean
Miele logo
Miele Washing Machine F2
NTC temperature sensor open-circuited
Kenmore logo
Kenmore Oven F2
Oven over-temperature detected

Find Replacement Parts

Use these links to find the exact replacement parts for your Whirlpool Oven:

🔩
Search PartSelect
Whirlpool Oven repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Whirlpool Oven Error Codes

F2-E0 Shorted keypad — stuck key on control panel F2-E1 Keypad/touchpad disconnected from control board F3-E0 Oven temperature sensor open circuit F3-E1 Oven temperature sensor short circuit F3-E2 Oven over-temperature — temp exceeded safe limit F5-E0 Door switch failure — latch not sensing door position

Frequently Asked Questions

Can I keep using my Whirlpool Oven when error F2 appears? +
It is not advisable. The oven may still power on, but running it while F2 is active can worsen the overheating fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F2 on a Whirlpool Oven? +
Across reported Whirlpool oven repairs, the most frequent is oven temperature sensor (RTD) shorted, reading low (40% of cases), bake/broil relay welded closed on the control (35%), then control board fault (25%). Check them in that order before replacing any parts.
F2 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F2 fault; if it returns, the overheating problem is still present. Move on to the physical checks — power cycle, then test the oven temperature sensor — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Whirlpool Oven error F2? +
A DIY repair typically runs $20–$380 in parts, versus $200–$500 for a professional service call, so handling it yourself saves around $180. Expect the work to take roughly 30–60 minutes.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Whirlpool Oven Error Codes ← All Whirlpool Error Codes