Whirlpool Oven Error Code F2-E0

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

✓ Low Severity 🔧🔧 Moderate DIY

Shorted keypad — stuck key on control panel

The most common cause of the F2-E0 error on a Whirlpool oven is key stuck from food/grease buildup (~55% of cases); start with: clean the control panel.

💰 DIY cost: $60–$160 👨‍🔧 Pro cost: $150–$320 Save $90+ by doing it yourself

Whirlpool Oven error code F2-E0 on the display panel — How the F2-E0 code appears on a Whirlpool oven display

What Does Error Code F2-E0 Mean on a Whirlpool Oven?

Shorted keypad — stuck key on control panel.

The Electronic Range Control (ERC) continuously scans the keypad membrane matrix. When it reads the same key as pressed for roughly 60 continuous seconds, it interprets this as a shorted or stuck key and displays F2-E0. Unlike F2-E1, which points more directly at the touchpad-to-control interface, F2-E0 indicates the board sees an active key signal — often from grease bridging contacts rather than an outright board fault.

Models affected: Whirlpool electric and gas ranges with electronic membrane keypads, including models such as WFE525S0JZ and WFG320M0BS

What owners report: Owners commonly report this code appearing after cooking spills or cleaning, when moisture or grease bridges a button. A quick win many describe is wiping the panel dry and cycling the breaker, which often clears it; if it returns immediately after every power-up, the keypad itself is usually suspect.

What Causes Error Code F2-E0?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Key stuck from food/grease buildup 55% of cases
2

Membrane keypad failure 35% of cases
3

Control board touchpad interface failure 10% of cases

How to Fix Whirlpool Oven Error Code F2-E0

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Clean the control panel

Wipe around all buttons with a barely-damp cloth. Dry completely.
2

Power cycle

Turn off circuit breaker for 5 minutes. Many F2E0 errors clear after power cycling.
3

Replace keypad/touchpad

If F2E0 returns after cleaning and cycling, replace the membrane keypad.

🔩 Whirlpool oven touchpad ($60–$160)

How to Reset Error Code F2-E0

Turn off circuit breaker 5 minutes. Wipe panel. If F2E0 persists, replace touchpad.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Whirlpool oven reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If new touchpad and F2E0 persists, the Electronic Range Control board has failed.

Average professional repair cost for this issue: $150–$320

Related Error Codes

F2-E1

Keypad/touchpad disconnected from control board

⚠ Medium Severity

Same Code on Other Brands

Error code F2-E0 appears on these other brands too. See every brand that shows F2-E0 →

Maytag Oven F2-E0

Shorted keypad — stuck key during normal operation

Amana Oven F2E0

Shorted or stuck keypad detected

KitchenAid Oven F2E0

Shorted keypad detected

Find Replacement Parts

Use these links to find the exact replacement parts for your Whirlpool Oven:

🔩

Search PartSelect

Whirlpool Oven repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Whirlpool Oven Error Codes

F3-E0 Oven temperature sensor open circuit F3-E1 Oven temperature sensor short circuit F3-E2 Oven over-temperature — temp exceeded safe limit F5-E0 Door switch failure — latch not sensing door position F5-E1 Self-clean door latch failure — lock timeout F9-E0 Door latch during lock function — latch system fault

Frequently Asked Questions

Can I keep using my Whirlpool Oven when error F2-E0 appears? +

Usually yes — F2-E0 is a low-severity control-panel notice that rarely stops the oven from working, but clearing the underlying cause prevents it from escalating.

What most commonly causes F2-E0 on a Whirlpool Oven? +

Across reported Whirlpool oven repairs, the most frequent is key stuck from food/grease buildup (55% of cases), membrane keypad failure (35%), then control board touchpad interface failure (10%). Check them in that order before replacing any parts.

F2-E0 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F2-E0 fault; if it returns, the control-panel problem is still present. Move on to the physical checks — clean the control panel, then power cycle — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Whirlpool Oven error F2-E0? +

A DIY repair typically runs $60–$160 in parts, versus $150–$320 for a professional service call, so handling it yourself saves around $90. Expect the work to take roughly 30–60 minutes.

Which Whirlpool Oven models show error F2-E0? +

F2-E0 is documented on Whirlpool electric and gas ranges with electronic membrane keypads, including models such as WFE525S0JZ and WFG320M0BS. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Whirlpool Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Whirlpool Oven Error Codes ← All Whirlpool Error Codes