ApplianceErrors.com

Whirlpool Oven Error Code F3-E0

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧 Easy DIY

Oven temperature sensor open circuit

The most common cause of the F3-E0 error on a Whirlpool oven is sensor failure (open circuit) (~65% of cases); start with: test the sensor.

💰 DIY cost: $20–$50 👨‍🔧 Pro cost: $150–$280 Save $130+ by doing it yourself
Whirlpool Oven error code F3-E0 on the display panel
How the F3-E0 code appears on a Whirlpool oven display

What Does Error Code F3-E0 Mean on a Whirlpool Oven?

Oven temperature sensor open circuit.

F3-E0 fires when the control board reads an open circuit across the oven's RTD temperature sensor, meaning no continuity between the two sensor pins. Without valid resistance feedback (normally near 1,080 ohms at room temperature), the board cannot regulate heat and disables the elements or burner for safety. This differs from F3-E1 and F3-E2, which flag a shorted sensor or out-of-range resistance rather than a fully broken connection, and from wiring-only faults you can reseat.

Models affected: Whirlpool, KitchenAid, and Maytag ovens sharing the same control platform, including electric ranges like the WFE525S0JZ; gas ranges such as the WFG320M0BS use an equivalent RTD probe
What owners report: Owners commonly report this code appearing at power-up or when a bake cycle is started, often with no heat at all. A loose or heat-fatigued 2-pin connector at the rear of the cavity is a frequent false trigger, and many report that simply reseating it or swapping the inexpensive sensor clears the code.

What Causes Error Code F3-E0?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Sensor failure (open circuit) 65% of cases
  2. 2
    Sensor connector loose 25% of cases
  3. 3
    Wiring harness to sensor damaged 10% of cases

How to Fix Whirlpool Oven Error Code F3-E0

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Test the sensor

    At room temperature, Whirlpool oven sensors read approximately 1,080–1,090 ohms. Open circuit = failed sensor.

    🔩 Multimeter
  2. 2

    Check connector at sensor

    Reseat the 2-pin connector.

  3. 3

    Replace the sensor

    Located in the upper-back of the oven cavity.

    🔩 Whirlpool oven temperature sensor ($20–$50)
    ⚠️ Let oven cool completely.

How to Reset Error Code F3-E0

After replacing sensor, turn on and test with a 350°F bake cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Whirlpool oven reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If new sensor and F3E0 persists, ERC board sensor input has failed.

Average professional repair cost for this issue: $150–$280

Related Error Codes

F3-E1
Oven temperature sensor short circuit
⚠ High Severity
F3-E2
Oven over-temperature — temp exceeded safe limit
🛑 Critical — Stop Using

Same Code on Other Brands

Error code F3-E0 appears on these other brands too. See every brand that shows F3-E0 →

Maytag logo
Maytag Oven F3-E0
Oven temperature sensor open circuit

Find Replacement Parts

Use these links to find the exact replacement parts for your Whirlpool Oven:

🔩
Search PartSelect
Whirlpool Oven repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Whirlpool Oven Error Codes

F2-E0 Shorted keypad — stuck key on control panel F2-E1 Keypad/touchpad disconnected from control board F5-E0 Door switch failure — latch not sensing door position F5-E1 Self-clean door latch failure — lock timeout F9-E0 Door latch during lock function — latch system fault F1-E0 EEPROM communication error — control board memory fault

Frequently Asked Questions

Can I keep using my Whirlpool Oven when error F3-E0 appears? +
It is not advisable. The oven may still power on, but running it while F3-E0 is active can worsen the sensor fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F3-E0 on a Whirlpool Oven? +
Across reported Whirlpool oven repairs, the most frequent is sensor failure (open circuit) (65% of cases), sensor connector loose (25%), then wiring harness to sensor damaged (10%). Check them in that order before replacing any parts.
F3-E0 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F3-E0 fault; if it returns, the sensor problem is still present. Move on to the physical checks — test the sensor, then check connector at sensor — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Whirlpool Oven error F3-E0? +
A DIY repair typically runs $20–$50 in parts, versus $150–$280 for a professional service call, so handling it yourself saves around $130. Expect the work to take about 10–20 minutes.
Which Whirlpool Oven models show error F3-E0? +
F3-E0 is documented on Whirlpool, KitchenAid, and Maytag ovens sharing the same control platform, including electric ranges like the WFE525S0JZ; gas ranges such as the WFG320M0BS use an equivalent RTD probe. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Whirlpool Oven Error Codes ← All Whirlpool Error Codes