Amana Oven Error Code F2E0

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 11, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY

Shorted or stuck keypad detected

The most common cause of the F2E0 error on a Amana oven is moisture behind the keypad membrane (~35% of cases); start with: power cycle and dry.

💰 DIY cost: $0–$160 👨‍🔧 Pro cost: $150–$320 Save $150+ by doing it yourself

Amana Oven error code F2E0 on the display panel — How the F2E0 code appears on a Amana oven display

What Does Error Code F2E0 Mean on a Amana Oven?

Shorted or stuck keypad detected.

F2E0 fires when the control detects a keypad input that stays active longer than a valid press should last, reading it as a shorted or continuously stuck key. The board can't tell a physically stuck button from a moisture bridge across the membrane traces, so both trip the same code. Unlike F1E0 (a control-board self-check failure) or F9E0 (door/latch related), F2E0 points specifically at the touchpad interface and its ribbon connection to the control.

Models affected: Amana electronic-control ranges and wall ovens with a membrane touchpad, including models such as the AER6303MFS

What owners report: Owners commonly report this code appearing shortly after wiping down or cleaning the panel, when moisture lingers behind the membrane. A quick win many describe is cutting power at the breaker and letting the console dry for several hours before retesting; if a specific key still won't respond afterward, the touchpad itself is usually the culprit.

What Causes Error Code F2E0?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Moisture behind the keypad membrane 35% of cases
2

Worn/shorted keypad 35% of cases
3

Loose keypad ribbon at the control 20% of cases
4

Control board failure 10% of cases

How to Fix Amana Oven Error Code F2E0

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Power cycle and dry

Kill power at the breaker for 5 minutes; if the panel was recently wiped down, let it dry a few hours.
2

Reseat the ribbon cable

Reseat the keypad ribbon connector at the oven control.

⚠️ Disconnect power before opening the console.
3

Replace the keypad

If a key remains stuck, replace the touchpad (often sold combined with the control board).

🔩 Amana keypad/touchpad ($70–$160)

How to Reset Error Code F2E0

Turn off the breaker for 5 minutes and retest the keypad.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Persistent F2E0 after drying and reseating means keypad or board replacement.

Average professional repair cost for this issue: $150–$320

Related Error Codes

F1E0

Oven control board internal fault (EEPROM/communication error)

⚠ Medium Severity

F9E0

Door latch fault — lock motor did not reach commanded position

⚠ Medium Severity

Same Code on Other Brands

Error code F2E0 appears on these other brands too. See every brand that shows F2E0 →

Whirlpool Oven F2-E0

Shorted keypad — stuck key on control panel

Maytag Oven F2-E0

Shorted keypad — stuck key during normal operation

KitchenAid Oven F2E0

Shorted keypad detected

Find Replacement Parts

Use these links to find the exact replacement parts for your Amana Oven:

🔩

Search PartSelect

Amana Oven repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions

Can I keep using my Amana Oven when error F2E0 appears? +

You often can for a cycle or two, but the control issue behind F2E0 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F2E0 on a Amana Oven? +

Across reported Amana oven repairs, the most frequent is moisture behind the keypad membrane (35% of cases), worn/shorted keypad (35%), then loose keypad ribbon at the control (20%). Check them in that order before replacing any parts.

F2E0 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F2E0 fault; if it returns, the control problem is still present. Move on to the physical checks — power cycle and dry, then reseat the ribbon cable — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Amana Oven error F2E0? +

A DIY repair typically runs $0–$160 in parts, versus $150–$320 for a professional service call, so handling it yourself saves around $150. Expect the work to take roughly 30–60 minutes.

Which Amana Oven models show error F2E0? +

F2E0 is documented on Amana electronic-control ranges and wall ovens with a membrane touchpad, including models such as the AER6303MFS. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Amana Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 11, 2026.

← All Amana Oven Error Codes ← All Amana Error Codes