Miele Washing Machine Error Code F2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY Also shown as: F02

NTC temperature sensor open-circuited

The most common cause of the F2 error on a Miele washing machine is thermistor open internally (~55% of cases); start with: power cycle.

💰 DIY cost: $25–$60 👨‍🔧 Pro cost: $200–$380 Save $175+ by doing it yourself

Miele Washing Machine error code F2 on the display panel — How the F2 code appears on a Miele washing machine display

What Does Error Code F2 Mean on a Miele Washing Machine?

NTC temperature sensor open-circuited.

F2 (also shown as F02) fires when the control board measures resistance across the NTC temperature sensor circuit as effectively infinite — an open circuit. This is the mirror image of F1, which flags a short. Because the board can no longer trust a valid temperature reading, it halts the cycle to protect the heating element. The open reading typically traces to a failed thermistor element, an unplugged or loose connector, or a broken lead between the sensor and the board.

Models affected: Miele front-load washers, including the W1 Series, that use an NTC thermistor to monitor heating and water temperature

What owners report: Owners commonly report F2 appearing at the start of a heated wash or mid-cycle when the machine tries to confirm temperature. A power cycle occasionally clears it if the trigger was a transient glitch, but a persistent code usually points to a disconnected plug or an aged sensor, and reseating the NTC connector is a frequently reported quick win before ordering a replacement.

What Causes Error Code F2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Thermistor open internally 55% of cases
2

Connector unplugged or loose 25% of cases
3

Lead broken/severed 20% of cases

How to Fix Miele Washing Machine Error Code F2

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Power cycle

Switch off at the wall, wait 5 minutes, switch back on.
2

Reseat the connector

Confirm the NTC plug is fully seated on both the sensor and the board.
3

Test the thermistor

An infinite/open reading at room temp confirms the sensor is open.

🔩 Multimeter
4

Replace the NTC sensor

Fit a genuine Miele thermistor.

🔩 Miele NTC thermistor ($25–$60)

How to Reset Error Code F2

Switch off at the wall, wait 5 minutes, restart. If F2 persists, replace the sensor.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Persistent F2 after a new sensor points to harness or board damage — Miele authorized service recommended.

Average professional repair cost for this issue: $200–$380

Related Error Codes

NTC temperature sensor short-circuited

⚠ Medium Severity

F20

Heating fault — water not reaching target temperature

⚠ High Severity

Same Code on Other Brands

Error code F2 appears on these other brands too. See every brand that shows F2 →

LG Oven F2

Oven over-temperature — exceeded maximum safe temperature

Whirlpool Dryer F02

Keypad / user interface fault — stuck key detected

Whirlpool Oven F2

Oven temperature too high — over-temperature fault

GE Appliances Oven F2

Oven over-temperature — exceeded 590°F in bake or 990°F in self-clean

Find Replacement Parts

Use these links to find the exact replacement parts for your Miele Washing Machine:

🔩

Search PartSelect

Miele Washing Machine repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Miele Washing Machine Error Codes

F11 Pump fault — water not draining F19 Drain time exceeded — slow or failed drain F16 Water protection system activated — flood protection triggered F53 Motor fault — drive motor failure F31 NTC temperature sensor fault F15 Hot water intake fault

Frequently Asked Questions

Can I keep using my Miele Washing Machine when error F2 appears? +

You often can for a cycle or two, but the sensor issue behind F2 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F2 on a Miele Washing Machine? +

Across reported Miele washing machine repairs, the most frequent is thermistor open internally (55% of cases), connector unplugged or loose (25%), then lead broken/severed (20%). Check them in that order before replacing any parts.

F2 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F2 fault; if it returns, the sensor problem is still present. Move on to the physical checks — power cycle, then reseat the connector — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Miele Washing Machine error F2? +

A DIY repair typically runs $25–$60 in parts, versus $200–$380 for a professional service call, so handling it yourself saves around $175. Expect the work to take roughly 30–60 minutes.

Which Miele Washing Machine models show error F2? +

F2 is documented on Miele front-load washers, including the W1 Series, that use an NTC thermistor to monitor heating and water temperature. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Miele Customer Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Miele Washing Machine Error Codes ← All Miele Error Codes