ApplianceErrors.com

Frigidaire Oven Error Code F93

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026
⚠ Medium Severity 🔧🔧 Moderate DIY

Door lock failure — latch motor did not reach position

The most common cause of the F93 error on a Frigidaire oven is door latch motor failure (~50% of cases); start with: power cycle.

💰 DIY cost: $50–$120 👨‍🔧 Pro cost: $200–$420 Save $150+ by doing it yourself
Frigidaire Oven error code F93 on the display panel
How the F93 code appears on a Frigidaire oven display

What Does Error Code F93 Mean on a Frigidaire Oven?

Door lock failure — latch motor did not reach position.

F93 fires when the control board commands the motorized door lock to move but the latch motor fails to drive the mechanism to the expected position within its timed window, as confirmed by the latch position switch. The board is tracking travel completion, not merely lock state. This distinguishes it from sibling F9x codes: F93 specifically flags an incomplete or stalled latch stroke, typically from a failing motor, a jammed mechanism, a bad position switch, or damaged latch wiring rather than a general lock fault.

Models affected: Frigidaire ranges with a motorized self-clean door lock, including models such as FCRE3052AS and FGGH3047VF
What owners report: Owners commonly report F93 appearing when starting or ending a self-clean cycle, or occasionally when the door won't unlock afterward. A transient timing error sometimes clears with a 10-minute power cycle, and some find a small obstruction or debris around the latch was quietly blocking full travel.

What Causes Error Code F93?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Door latch motor failure 50% of cases
  2. 2
    Latch mechanism jammed / obstructed travel 25% of cases
  3. 3
    Latch position switch failed 20% of cases
  4. 4
    Wiring to the latch motor damaged 5% of cases

How to Fix Frigidaire Oven Error Code F93

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Unplug the range for 10 minutes, then try the lock/unlock again. A transient timing F93 clears with a reset.

  2. 2

    Clear the latch path

    Inspect the latch for debris or a mechanical obstruction that stops the motor from completing its travel.

    ⚠️ Unplug the range before accessing internal components.
  3. 3

    Test the latch motor and switch

    Check the latch motor and position switch for continuity and correct operation.

    🔩 Multimeter
  4. 4

    Replace the door latch assembly

    Replace the latch motor/assembly if the motor or switch tests bad.

    🔩 Frigidaire oven door latch assembly ($50–$120)
    ⚠️ Unplug the range before accessing internal components.

How to Reset Error Code F93

Unplug 10 minutes. If F93 returns, clear the latch path, then replace the latch assembly.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Frigidaire oven reset guide → Enter diagnostic mode → Symptom guide: Oven door locked →

Did this guide fix your appliance?

When to Call a Professional

If the latch assembly is new and F93 persists, the control board latch-motor relay has failed.

Average professional repair cost for this issue: $200–$420

Related Error Codes

F90
Door latch failure — lock motor did not reach locked position
⚠ Medium Severity
F91
Door latch failure — lock motor did not reach unlocked position
⚠ Medium Severity
F92
Door lock failure — latch stuck in the locked position
⚠ Medium Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Oven:

🔩
Search PartSelect
Frigidaire Oven repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Frigidaire Oven Error Codes

F10 Runaway temperature — oven overheating F30 Oven temperature probe failure — open circuit F11 Shorted key — button stuck or shorted F31 Oven temperature probe short circuit F13 Control board internal checksum error F14 EEPROM error — control board memory fault

Frequently Asked Questions

Can I keep using my Frigidaire Oven when error F93 appears? +
You often can for a cycle or two, but the door issue behind F93 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes F93 on a Frigidaire Oven? +
Across reported Frigidaire oven repairs, the most frequent is door latch motor failure (50% of cases), latch mechanism jammed / obstructed travel (25%), then latch position switch failed (20%). Check them in that order before replacing any parts.
F93 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F93 fault; if it returns, the door problem is still present. Move on to the physical checks — power cycle, then clear the latch path — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Frigidaire Oven error F93? +
A DIY repair typically runs $50–$120 in parts, versus $200–$420 for a professional service call, so handling it yourself saves around $150. Expect the work to take roughly 30–60 minutes.
Which Frigidaire Oven models show error F93? +
F93 is documented on Frigidaire ranges with a motorized self-clean door lock, including models such as FCRE3052AS and FGGH3047VF. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Frigidaire Oven Error Codes ← All Frigidaire Error Codes