MER8800FZ Error Codes — Maytag Oven
🏷️ Model: MER8800FZ 📅 Production: 2017–2021 🔥 Type: Oven
6.4 cu ft electric range. Whirlpool oven platform — F-E paired codes; F3-E0 oven sensor faults are the most common and cheapest to fix.
Most Common Codes on the MER8800FZ
All Other Maytag Oven Codes
The MER8800FZ can also display any of the standard Maytag oven codes:
F1-E1 ERC board keypad stuck key — shorted keypad detected during power-up F2-E1 Keypad disconnected — ribbon cable failure F3-E1 Oven temperature sensor short circuit F3-E2 Oven over-temperature — exceeded safe operating limit F5-E1 Self-clean door latch failure — latch did not lock F0 Electronic Range Control (ERC) failure — failed transistor/control board F1 ERC control board failure / clock fault — watchdog reset F5-E0 Oven door latch fault — cannot lock for self-clean LOC Control lock active — keypad intentionally locked SAB Sabbath mode active — special operating mode, not a fault PF Power failure — a power interruption occurred
💡 Tip: Your model's serial sticker (door frame, rim, or back panel) confirms the exact
model number. Codes can differ between revisions of the same model line — if a code on your display
isn't listed here, check the
full Maytag oven code list.