Maytag Oven Error Code F1-E1

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY

ERC board keypad stuck key — shorted keypad detected during power-up

The most common cause of the F1-E1 error on a Maytag oven is keypad membrane failure (key stuck at power-on) (~60% of cases); start with: clean the control panel.

💰 DIY cost: $60–$160 👨‍🔧 Pro cost: $150–$320 Save $90+ by doing it yourself

Maytag Oven error code F1-E1 on the display panel — How the F1-E1 code appears on a Maytag oven display

What Does Error Code F1-E1 Mean on a Maytag Oven?

ERC board keypad stuck key — shorted keypad detected during power-up.

During power-up the ERC board runs a keypad scan and reads a key line as already closed, interpreting it as a stuck or shorted button. Because a persistently pressed key blocks normal command entry, the board halts startup and posts F1-E1. Unlike F2-E0, which flags a stuck key detected during ordinary operation, F1-E1 is caught specifically at power-on. F1-E0 points more toward a broader keypad or board communication fault rather than a single shorted key.

Models affected: Maytag electric ranges/wall ovens with an ERC control board and membrane keypad, including models such as the MER8800FZ; the F1-E1 code appears across a broad range of ERC-equipped Maytag ovens.

What owners report: Owners commonly report this code appearing right after a self-clean cycle or when cooking spatter has worked into the seams between buttons. A careful wipe-down followed by a breaker power cycle often clears it, though if the membrane has failed internally the code tends to return within a day or two.

What Causes Error Code F1-E1?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Keypad membrane failure (key stuck at power-on) 60% of cases
2

Food debris bridging keypad contacts 25% of cases
3

ERC board keypad scan circuit failure 15% of cases

How to Fix Maytag Oven Error Code F1-E1

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Clean the control panel

Wipe all keypad buttons with a barely-damp cloth. Pay attention to seams between buttons where grease can accumulate.
2

Power cycle

Turn off circuit breaker for 5 minutes, then restore power. If a key was physically stuck, cleaning and power cycling often resolves F1-E1.
3

Replace the keypad membrane

If F1-E1 returns after cleaning, the keypad membrane has failed internally.

🔩 Maytag oven keypad ($60–$160)

How to Reset Error Code F1-E1

Wipe panel clean. Turn off circuit breaker 5 minutes. If F1-E1 persists, replace keypad.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

If new keypad and F1-E1 persists, the ERC board keypad scan circuit has failed.

Average professional repair cost for this issue: $150–$320

Related Error Codes

F2-E0

Shorted keypad — stuck key during normal operation

✓ Low Severity

F1-E0

ERC board EEPROM checksum error — control board memory failure

⚠ High Severity

Same Code on Other Brands

Error code F1-E1 appears on these other brands too. See every brand that shows F1-E1 →

Whirlpool Washing Machine F1E1

Main control board failure

Whirlpool Dishwasher F1E1

Control board / thermistor stuck — electronic control fault

Whirlpool Oven F1-E1

EEPROM checksum error — corrupted control memory

Kenmore Dishwasher F1E1

Control board memory error — stuck relay or corrupted firmware

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Oven:

🔩

Search PartSelect

Maytag Oven repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Oven Error Codes

F2-E1 Keypad disconnected — ribbon cable failure F3-E0 Oven temperature sensor open circuit F3-E1 Oven temperature sensor short circuit F3-E2 Oven over-temperature — exceeded safe operating limit F5-E1 Self-clean door latch failure — latch did not lock F9-E0 Door latch during lock — general latch circuit fault

Frequently Asked Questions

Can I keep using my Maytag Oven when error F1-E1 appears? +

You often can for a cycle or two, but the control-panel issue behind F1-E1 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F1-E1 on a Maytag Oven? +

Across reported Maytag oven repairs, the most frequent is keypad membrane failure (key stuck at power-on) (60% of cases), food debris bridging keypad contacts (25%), then eRC board keypad scan circuit failure (15%). Check them in that order before replacing any parts.

F1-E1 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F1-E1 fault; if it returns, the control-panel problem is still present. Move on to the physical checks — clean the control panel, then power cycle — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Maytag Oven error F1-E1? +

A DIY repair typically runs $60–$160 in parts, versus $150–$320 for a professional service call, so handling it yourself saves around $90. Expect the work to take roughly 30–60 minutes.

Which Maytag Oven models show error F1-E1? +

F1-E1 is documented on Maytag electric ranges/wall ovens with an ERC control board and membrane keypad, including models such as the MER8800FZ; the F1-E1 code appears across a broad range of ERC-equipped Maytag ovens.. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Maytag Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Maytag Oven Error Codes ← All Maytag Error Codes