Maytag Oven Error Code F3-E2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

🛑 Critical — Stop Using 🔧🔧🔧 Advanced DIY

Oven over-temperature — exceeded safe operating limit

The most common cause of the F3-E2 error on a Maytag oven is temperature sensor failure causing runaway heating (~40% of cases); start with: turn off circuit breaker immediately.

💰 DIY cost: $0–$50 👨‍🔧 Pro cost: $280–$580 Save $280+ by doing it yourself

Maytag Oven error code F3-E2 on the display panel — How the F3-E2 code appears on a Maytag oven display

What Does Error Code F3-E2 Mean on a Maytag Oven?

Oven over-temperature — exceeded safe operating limit.

F3-E2 fires when the ERC reads an oven cavity temperature above its safe ceiling — typically over about 575°F during normal cooking. The board compares the RTD sensor's resistance against expected values; a shorted sensor, a bake relay welded closed, or wiring feeding continuous element power all produce runaway heating. The control cuts all heat and locks out use. It differs from F3-E0/F3-E1, which flag an open or shorted sensor circuit rather than an actual measured over-temperature condition.

Models affected: Maytag electric ranges/wall ovens with an ERC control board and RTD temperature sensor, including models such as the MER8800FZ

What owners report: Owners commonly report this appearing during or shortly after a self-clean cycle, or when the oven seems to keep heating past the set point. Because a stuck bake relay or failed sensor is usually behind it, the code typically will not clear on its own and warrants shutting the breaker until it's diagnosed.

What Causes Error Code F3-E2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Temperature sensor failure causing runaway heating 40% of cases
2

Bake relay on ERC board stuck in closed position 35% of cases
3

Wiring fault causing continuous power to heating element 15% of cases
4

Self-clean cycle runaway 10% of cases

How to Fix Maytag Oven Error Code F3-E2

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Turn off circuit breaker immediately

Do not attempt to use the oven again until the fault is diagnosed. Allow the oven to cool fully — at least 1 hour.

⚠️ FIRE HAZARD — do not open the oven door or use the oven until diagnosed.
2

Test temperature sensor after cooling

Disconnect and test the oven temperature sensor (should read ~1,080 ohms). A failed open or shorted sensor can cause the ERC board to drive the heating element continuously.

🔩 Multimeter
3

Replace sensor if out of spec

If sensor reads correctly, the bake relay on the ERC board has stuck closed.

🔩 Maytag oven temperature sensor ($20–$50) 🔩 Maytag oven ERC board ($120–$300)

How to Reset Error Code F3-E2

Turn off circuit breaker. Do not use until fault is diagnosed by a professional.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

F3-E2 is a safety event. Have a qualified technician diagnose the oven before returning it to service.

Average professional repair cost for this issue: $280–$580

Related Error Codes

F3-E0

Oven temperature sensor open circuit

⚠ High Severity

F3-E1

Oven temperature sensor short circuit

⚠ High Severity

Same Code on Other Brands

Error code F3-E2 appears on these other brands too. See every brand that shows F3-E2 →

Whirlpool Washing Machine F3E2

Pressure switch failure — open circuit

Whirlpool Dryer F3E2

Moisture sensor circuit fault

Whirlpool Dishwasher F3E2

Thermistor failure — high resistance / open circuit

Whirlpool Oven F3-E2

Oven over-temperature — temp exceeded safe limit

Find Replacement Parts

Use these links to find the exact replacement parts for your Maytag Oven:

🔩

Search PartSelect

Maytag Oven repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Maytag Oven Error Codes

F1-E0 ERC board EEPROM checksum error — control board memory failure F1-E1 ERC board keypad stuck key — shorted keypad detected during power-up F2-E0 Shorted keypad — stuck key during normal operation F2-E1 Keypad disconnected — ribbon cable failure F5-E1 Self-clean door latch failure — latch did not lock F9-E0 Door latch during lock — general latch circuit fault

Frequently Asked Questions

Can I keep using my Maytag Oven when error F3-E2 appears? +

No — stop using the oven right away. F3-E2 is a critical temperature fault, and continuing to run it risks further damage or a safety hazard. Unplug it and resolve the fault before the next cycle.

What most commonly causes F3-E2 on a Maytag Oven? +

Across reported Maytag oven repairs, the most frequent is temperature sensor failure causing runaway heating (40% of cases), bake relay on ERC board stuck in closed position (35%), then wiring fault causing continuous power to heating element (15%). Check them in that order before replacing any parts.

F3-E2 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F3-E2 fault; if it returns, the temperature problem is still present. Move on to the physical checks — turn off circuit breaker immediately, then test temperature sensor after cooling — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.

How much does it cost to fix Maytag Oven error F3-E2? +

A DIY repair typically runs $0–$50 in parts, versus $280–$580 for a professional service call, so handling it yourself saves around $280. Expect the work to take 1–3 hours.

Which Maytag Oven models show error F3-E2? +

F3-E2 is documented on Maytag electric ranges/wall ovens with an ERC control board and RTD temperature sensor, including models such as the MER8800FZ. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Maytag Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Maytag Oven Error Codes ← All Maytag Error Codes