How do I fix LG Dryer error code PS?

Step 1: Check the breaker. Confirm BOTH halves of the dryer's double-pole breaker are on. A half-tripped breaker leaves one leg dead. Step 2: Inspect the cord and terminal block. Unplug, remove the terminal cover, and check that the cord wires are tight and undamaged on the block. Step 3: Verify outlet voltage. Have an electrician confirm 240V across the legs and 120V each leg to ground at the outlet.

Is LG Dryer error code PS serious?

Error code PS has high severity. Continuing to run the appliance may cause additional damage. Repair soon. DIY repair cost: 0–40. Professional repair: 150–300.

LG Dryer Error Code PS

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 14, 2026

⚠ High Severity 🔧🔧 Moderate DIY

Power supply error — improper voltage at the cord or terminal block

The dryer detected improper voltage reaching the control — typically a miswired power cord, a loose terminal-block connection, or a power-supply interruption. Electric dryers need 240V across two hot legs; if one leg is missing or the cord is wired wrong, PS appears.

💰 DIY cost: $0–$40 👨‍🔧 Pro cost: $150–$300 Save $150+ by doing it yourself

LG Dryer error code PS on the display panel — How the PS code appears on a LG dryer display

What Does Error Code PS Mean on a LG Dryer?

Power supply error — improper voltage at the cord or terminal block.

Models affected: LG electric dryers

What Causes Error Code PS?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Power cord miswired or loose at terminal block 40% of cases
2

Loose/burnt terminal block connection 30% of cases
3

One 240V leg missing (breaker/outlet) 25% of cases
4

Damaged power cord 5% of cases

How to Fix LG Dryer Error Code PS

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Check the breaker

Confirm BOTH halves of the dryer's double-pole breaker are on. A half-tripped breaker leaves one leg dead.
2

Inspect the cord and terminal block

Unplug, remove the terminal cover, and check that the cord wires are tight and undamaged on the block.

🔩 Nut driver

⚠️ Unplug the dryer before removing the terminal block cover.
3

Verify outlet voltage

Have an electrician confirm 240V across the legs and 120V each leg to ground at the outlet.

How to Reset Error Code PS

Reset both halves of the breaker and confirm the cord is tight at the terminal block, then restart.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Open wiring inside the wall outlet or a damaged terminal block requires a licensed electrician.

Average professional repair cost for this issue: $150–$300

Related Error Codes

No power to the heating element

⚠ High Severity

Same Code on Other Brands

Error code PS appears on these other brands too. See every brand that shows PS →

Samsung Dryer PS

Duct sensor blockage — vent/moisture sensor reading abnormal due to restricted exhaust

Find Replacement Parts

Use these links to find the exact replacement parts for your LG Dryer:

🔩

Search PartSelect

LG Dryer repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More LG Dryer Error Codes

D80 Duct blockage detected — exhaust duct 80% blocked D90 Duct blockage detected — exhaust duct 90% blocked D95 Duct blockage detected — exhaust duct 95% blocked F9 Thermistor failure — temperature sensor not reading CL Child lock is active — controls are locked D75 Exhaust duct ~75% blocked — airflow restriction warning

Frequently Asked Questions

What does error code PS mean on a LG Dryer? +

Power supply error — improper voltage at the cord or terminal block

How do I fix error code PS on my LG Dryer? +

Start by Confirm BOTH halves of the dryer's double-pole breaker are on. A half-tripped breaker leaves one leg dead.. If that doesn't resolve it, work through each step in the fix guide above.

How do I clear or reset error code PS? +

Reset both halves of the breaker and confirm the cord is tight at the terminal block, then restart.

Is error code PS serious? +

This is a high-severity error. You should address it soon. Running the appliance may cause further damage.

Sources & References

• LG Support — Help Library — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 14, 2026.

← All LG Dryer Error Codes ← All LG Error Codes