Kenmore Dryer Error Code F22

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 11, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY

Outlet thermistor failure — reading open

The most common cause of the F22 error on a Kenmore dryer is failed outlet thermistor (open circuit) (~60% of cases); start with: test the thermistor.

💰 DIY cost: $15–$35 👨‍🔧 Pro cost: $130–$250 Save $115+ by doing it yourself

Kenmore Dryer error code F22 on the display panel — How the F22 code appears on a Kenmore dryer display

What Does Error Code F22 Mean on a Kenmore Dryer?

Outlet thermistor failure — reading open.

F22 fires when the control board reads the outlet (exhaust) thermistor as an open circuit — effectively infinite resistance instead of the expected ~10k ohms at room temperature. Without a valid exhaust temperature signal, the board cannot regulate heat safely, so it blocks or halts the cycle. This differs from F23, which flags a shorted thermistor, and from F01, a control-board fault. Most often the sensor itself has failed open, though a broken wire or unseated connector produces the same reading.

Models affected: Whirlpool-platform Kenmore 110 Series dryers with electronic controls and an outlet (exhaust) thermistor

What owners report: Owners commonly report F22 appearing at the start of or partway through a cycle, sometimes with little or no heat. A loose or corroded connector at the blower housing can mimic a bad sensor, so reseating the harness is a frequent quick win before replacing the inexpensive thermistor.

What Causes Error Code F22?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Failed outlet thermistor (open circuit) 60% of cases
2

Broken wire or loose connector to thermistor 30% of cases
3

Main control board input fault 10% of cases

How to Fix Kenmore Dryer Error Code F22

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Test the thermistor

Unplug the dryer, remove the lower access panel, and measure the thermistor — about 10k ohms at room temperature.

⚠️ Unplug before testing.
2

Check the wiring

Inspect the harness from the thermistor to the control board for chafed or broken wires.
3

Replace the thermistor

If it reads open or far off spec, replace it.

🔩 Kenmore dryer outlet thermistor ($15–$35)

How to Reset Error Code F22

Unplug for 5 minutes after replacing the thermistor; the code clears on the next successful cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

If a new thermistor still produces F22, the main control board input circuit has failed.

Average professional repair cost for this issue: $130–$250

Related Error Codes

F23

Outlet thermistor failure — reading shorted

⚠ Medium Severity

F01

Main electronic control board failure

⚠ High Severity

Same Code on Other Brands

Error code F22 appears on these other brands too. See every brand that shows F22 →

Whirlpool Washing Machine F22

Door lock failure — door did not lock

Whirlpool Dryer F22

Outlet thermistor failure

Maytag Washing Machine F22

Door lock fault — door will not lock

Maytag Dryer F22

Outlet thermistor (temperature sensor) failure

Find Replacement Parts

Use these links to find the exact replacement parts for your Kenmore Dryer:

🔩

Search PartSelect

Kenmore Dryer repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Kenmore Dryer Error Codes

F02 Keypad / user interface stuck button fault F28 Moisture sensor fault F70 Communication failure between control boards PF Power failure during the cycle AF Restricted airflow detected

Frequently Asked Questions

Can I keep using my Kenmore Dryer when error F22 appears? +

You often can for a cycle or two, but the temperature-sensor issue behind F22 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F22 on a Kenmore Dryer? +

Across reported Kenmore dryer repairs, the most frequent is failed outlet thermistor (open circuit) (60% of cases), broken wire or loose connector to thermistor (30%), then main control board input fault (10%). Check them in that order before replacing any parts.

F22 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F22 fault; if it returns, the temperature-sensor problem is still present. Move on to the physical checks — test the thermistor, then check the wiring — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Kenmore Dryer error F22? +

A DIY repair typically runs $15–$35 in parts, versus $130–$250 for a professional service call, so handling it yourself saves around $115. Expect the work to take roughly 30–60 minutes.

Which Kenmore Dryer models show error F22? +

F22 is documented on Whirlpool-platform Kenmore 110 Series dryers with electronic controls and an outlet (exhaust) thermistor. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Kenmore Customer Care — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 11, 2026.

← All Kenmore Dryer Error Codes ← All Kenmore Error Codes