Kenmore Dryer Error Code PF

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 11, 2026

✓ Low Severity 🔧 Easy DIY

Power failure during the cycle

The most common cause of the PF error on a Kenmore dryer is household power outage (~50% of cases); start with: restart the cycle.

💰 DIY cost: $0–$40 👨‍🔧 Pro cost: $120–$220 Save $120+ by doing it yourself

Kenmore Dryer error code PF on the display panel — How the PF code appears on a Kenmore dryer display

What Does Error Code PF Mean on a Kenmore Dryer?

Power failure during the cycle.

PF is logged when the control board detects that power was lost and then restored mid-cycle. On restart, the board flags the interruption rather than a component fault. It is triggered by any break in the 240V supply — a blackout, a tripped leg of the double-pole breaker, or a loose cord or receptacle connection. Unlike fault codes such as F01 (control board failure), PF is purely informational and does not indicate damaged electronics unless it recurs without any real outage.

Models affected: Whirlpool-platform Kenmore 110 Series dryers with electronic control boards

What owners report: Owners commonly see PF after a storm, a flipped breaker, or when another large appliance shares the circuit, and pressing Start usually clears it. Repeated PF with no actual outage often points to a loose terminal-block screw or a worn outlet, which owners report fixing once the connection is tightened or the receptacle is replaced.

What Causes Error Code PF?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Household power outage 50% of cases
2

Tripped or weak circuit breaker 25% of cases
3

Loose power cord at terminal block 15% of cases
4

Worn outlet/receptacle 10% of cases

How to Fix Kenmore Dryer Error Code PF

🔧 Easy DIY Est. time: 10–20 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Restart the cycle

Press Start to resume or restart the cycle — the code is just a notification.
2

Check the breaker

A 240V dryer uses a double-pole breaker; if one leg trips repeatedly, replace the breaker.

⚠️ Breaker panel work involves mains voltage — turn off the main and proceed only if qualified.
3

Inspect the cord and terminal block

Unplug and check that cord terminals are tight and free of scorching.

🔩 Kenmore dryer power cord ($20–$40)

⚠️ Never inspect the terminal block with the dryer plugged in.

How to Reset Error Code PF

Press Start to clear PF and resume the cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Dryer won't start →

Did this guide fix your appliance?

When to Call a Professional

If PF repeats with no household outages, have an electrician check the circuit and receptacle.

Average professional repair cost for this issue: $120–$220

Related Error Codes

F01

Main electronic control board failure

⚠ High Severity

Same Code on Other Brands

Error code PF appears on these other brands too. See every brand that shows PF →

LG Dryer PF

Power failure — cycle interrupted

LG Oven PF

Power failure — unit lost power during operation (not a fault)

Whirlpool Washing Machine PF

Power failure — a power interruption stopped the cycle

Whirlpool Dryer PF

Power failure — a power interruption stopped the cycle

Find Replacement Parts

Use these links to find the exact replacement parts for your Kenmore Dryer:

🔩

Search PartSelect

Kenmore Dryer repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Kenmore Dryer Error Codes

F02 Keypad / user interface stuck button fault F22 Outlet thermistor failure — reading open F23 Outlet thermistor failure — reading shorted F28 Moisture sensor fault F70 Communication failure between control boards AF Restricted airflow detected

Frequently Asked Questions

Can I keep using my Kenmore Dryer when error PF appears? +

Usually yes — PF is a low-severity power notice that rarely stops the dryer from working, but clearing the underlying cause prevents it from escalating.

What most commonly causes PF on a Kenmore Dryer? +

Across reported Kenmore dryer repairs, the most frequent is household power outage (50% of cases), tripped or weak circuit breaker (25%), then loose power cord at terminal block (15%). Check them in that order before replacing any parts.

PF keeps coming back after a reset — what should I check next? +

A reset only clears the stored PF fault; if it returns, the power problem is still present. Move on to the physical checks — restart the cycle, then check the breaker — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.

How much does it cost to fix Kenmore Dryer error PF? +

A DIY repair typically runs $0–$40 in parts, versus $120–$220 for a professional service call, so handling it yourself saves around $120. Expect the work to take about 10–20 minutes.

Which Kenmore Dryer models show error PF? +

PF is documented on Whirlpool-platform Kenmore 110 Series dryers with electronic control boards. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Kenmore Customer Care — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 11, 2026.

← All Kenmore Dryer Error Codes ← All Kenmore Error Codes