Whirlpool Washing Machine Error Code F22

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY

Door lock failure — door did not lock

The most common cause of the F22 error on a Whirlpool washing machine is door not fully closed / item caught in seal (~35% of cases); start with: confirm the door is shut.

💰 DIY cost: $40–$100 👨‍🔧 Pro cost: $150–$320 Save $110+ by doing it yourself

Whirlpool Washing Machine error code F22 on the display panel — How the F22 code appears on a Whirlpool washing machine display

What Does Error Code F22 Mean on a Whirlpool Washing Machine?

Door lock failure — door did not lock.

F22 fires when the control board commands the door lock but never receives confirmation that the door latched, typically after about six failed attempts. The board monitors the lock's switch feedback; without a locked signal it blocks the cycle for safety, since the drum cannot spin or fill with an unsecured door. This differs from F5E1/F5E2, which point to the lock staying latched or unlatching unexpectedly rather than failing to engage in the first place.

Models affected: Front-load washers with an electronic door lock assembly, such as the WFW5620HW, WFW9620HC, and WFW6620HW

What owners report: Owners commonly report this appears when laundry or a bit of the gasket gets pinched at the door edge, preventing a full latch. Many find that firmly reclosing the door or clearing an obstruction resolves it quickly, though a persistent code often points to a worn latch or loose connector.

What Causes Error Code F22?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Door not fully closed / item caught in seal 35% of cases
2

Worn or failed door lock assembly 35% of cases
3

Wiring/connector to door lock damaged 20% of cases
4

Control board lock output fault 10% of cases

How to Fix Whirlpool Washing Machine Error Code F22

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Confirm the door is shut

Close the door firmly and check for laundry caught between the door and gasket.
2

Inspect the door strike and latch

Check the strike on the door and the lock mechanism on the frame for wear or damage.

🔩 Whirlpool door lock assembly ($40–$100)
3

Test the door lock assembly

Remove and test the lock solenoid/switches for continuity.

🔩 Multimeter

⚠️ Unplug the washer before accessing the door lock.
4

Check the wiring

Inspect the harness and connectors from the control board to the door lock.

How to Reset Error Code F22

Ensure the door is fully closed and restart. If F22 persists, the door lock assembly needs inspection.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Whirlpool washer reset guide → Enter diagnostic mode → Symptom guide: Washer won't start →

Did this guide fix your appliance?

When to Call a Professional

If the door lock assembly is new and the wiring is sound, the main control board lock circuit has failed.

Average professional repair cost for this issue: $150–$320

Related Error Codes

F5E2

Door lock failure — latch cannot engage

⚠ Medium Severity

F5E1

Door switch failure — lid/door switch not actuating

⚠ Medium Severity

Same Code on Other Brands

Error code F22 appears on these other brands too. See every brand that shows F22 →

Maytag Washing Machine F22

Door lock fault — door will not lock

Maytag Dryer F22

Outlet thermistor (temperature sensor) failure

Amana Dryer F22

Outlet thermistor failure

Kenmore Dryer F22

Outlet thermistor failure — reading open

Find Replacement Parts

Use these links to find the exact replacement parts for your Whirlpool Washing Machine:

🔩

Search PartSelect

Whirlpool Washing Machine repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Whirlpool Washing Machine Error Codes

F8E1 Low water fill detected — water inlet problem F9E1 Drain failure — cycle paused, water not draining F1E1 Main control board failure SUD Excessive suds detected — too much detergent F0E2 Dispenser cannot dispense detergent or additive F7E1 Motor speed error — motor not reaching target RPM

Frequently Asked Questions

Can I keep using my Whirlpool Washing Machine when error F22 appears? +

You often can for a cycle or two, but the door issue behind F22 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F22 on a Whirlpool Washing Machine? +

Across reported Whirlpool washing machine repairs, the most frequent is door not fully closed / item caught in seal (35% of cases), worn or failed door lock assembly (35%), then wiring/connector to door lock damaged (20%). Check them in that order before replacing any parts.

F22 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F22 fault; if it returns, the door problem is still present. Move on to the physical checks — confirm the door is shut, then inspect the door strike and latch — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Whirlpool Washing Machine error F22? +

A DIY repair typically runs $40–$100 in parts, versus $150–$320 for a professional service call, so handling it yourself saves around $110. Expect the work to take roughly 30–60 minutes.

Which Whirlpool Washing Machine models show error F22? +

F22 is documented on Front-load washers with an electronic door lock assembly, such as the WFW5620HW, WFW9620HC, and WFW6620HW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Whirlpool Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Whirlpool Washing Machine Error Codes ← All Whirlpool Error Codes