ApplianceErrors.com

Haier Washing Machine Error Code E1

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧 Easy DIY

Water inlet error — no water detected

The most common cause of the E1 error on a Haier washing machine is supply valve closed (~40% of cases); start with: check supply valves.

💰 DIY cost: $0–$65 👨‍🔧 Pro cost: $120–$250 Save $120+ by doing it yourself
Haier Washing Machine error code E1 on the display panel
How the E1 code appears on a Haier washing machine display

What Does Error Code E1 Mean on a Haier Washing Machine?

Water inlet error — no water detected.

During the fill stage the control board expects the water level (measured by the pressure switch or sensor) to rise within a set time after energizing the inlet valve solenoid. E1 fires when no meaningful level increase is detected, indicating water isn't reaching the drum. This differs from E2, which flags a drain or overflow condition. Common triggers are a closed supply valve, a kinked hose, low household pressure, or a failed inlet valve solenoid rather than a control-board fault.

Models affected: Haier top-load and front-load washers using the E1 fill-error convention, including models such as the HLC1700AXW
What owners report: Owners commonly report E1 appearing right after installation, after the hoses have been moved, or when a shutoff valve was only partially reopened. The frequent quick win is simply confirming both supply valves are fully open and straightening a kinked or pinched inlet hose before suspecting the valve itself.

What Causes Error Code E1?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Supply valve closed 40% of cases
  2. 2
    Inlet hose kinked 30% of cases
  3. 3
    Water inlet valve failure 20% of cases
  4. 4
    Low water pressure 10% of cases

How to Fix Haier Washing Machine Error Code E1

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Check supply valves

    Both hot and cold valves must be fully open.

  2. 2

    Check inlet hose

    No kinks from wall to machine.

  3. 3

    Test inlet valve

    Test solenoid coils for continuity.

    🔩 Haier inlet valve ($25–$65)
  4. 4

    Replace valve if failed

    Install new valve.

How to Reset Error Code E1

Open both supply valves fully and straighten the inlet hose. Unplug the washer for 60 seconds to clear the code, plug back in, and restart the cycle from the beginning.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Washer not filling →

Did this guide fix your appliance?

When to Call a Professional

If supply is confirmed good, inlet valve replacement resolves this.

Average professional repair cost for this issue: $120–$250

Related Error Codes

E2
Drain error — water not draining
⚠ High Severity

Same Code on Other Brands

Error code E1 appears on these other brands too. See every brand that shows E1 →

LG logo
LG Dryer F9
Thermistor failure — temperature sensor not reading
LG logo
LG Dishwasher AE
Leakage detected — water found in base tray
GE Appliances logo
GE Appliances Dryer E1
Thermistor open — temperature sensor failure
Maytag logo
Maytag Dryer E1
Thermistor open circuit — temperature sensor failure

Find Replacement Parts

Use these links to find the exact replacement parts for your Haier Washing Machine:

🔩
Search PartSelect
Haier Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Haier Washing Machine Error Codes

E4 Door not closed or door lock failure E3 Motor error — drive motor fault E7 Water level sensor fault F7 Motor fault — drum motor not responding

Frequently Asked Questions

Can I keep using my Haier Washing Machine when error E1 appears? +
You often can for a cycle or two, but the water-supply issue behind E1 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes E1 on a Haier Washing Machine? +
Across reported Haier washing machine repairs, the most frequent is supply valve closed (40% of cases), inlet hose kinked (30%), then water inlet valve failure (20%). Check them in that order before replacing any parts.
E1 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E1 fault; if it returns, the water-supply problem is still present. Move on to the physical checks — check supply valves, then check inlet hose — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Haier Washing Machine error E1? +
A DIY repair typically runs $0–$65 in parts, versus $120–$250 for a professional service call, so handling it yourself saves around $120. Expect the work to take about 10–20 minutes.
Which Haier Washing Machine models show error E1? +
E1 is documented on Haier top-load and front-load washers using the E1 fill-error convention, including models such as the HLC1700AXW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Haier Washing Machine Error Codes ← All Haier Error Codes