Electrolux Dryer Error Code E01

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY Also shown as: E:01

Door lock / safety circuit fault — dryer will not start

💰 DIY cost: $20–$50 👨‍🔧 Pro cost: $150–$300 Save $130+ by doing it yourself

Electrolux Dryer error code E01 on the display panel — How the E01 code appears on a Electrolux dryer display

What Does Error Code E01 Mean on a Electrolux Dryer?

Door lock / safety circuit fault — dryer will not start.

The control cannot confirm the door-lock or start safety circuit, so the dryer will not begin a cycle. A worn door latch or a loose connection between the latch and the control board is the common cause.

What Causes Error Code E01?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Door latch/lock worn or not engaging 45% of cases
2

Debris obstructing the latch 20% of cases
3

Wiring between latch and board loose 20% of cases
4

Control board door input fault 15% of cases

How to Fix Electrolux Dryer Error Code E01

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Reset the dryer

Unplug for 5–10 minutes, then retry.
2

Inspect the door latch

Clear any lint or debris and confirm the door clicks shut and the latch engages.
3

Test the door switch

Test the door switch/latch for continuity in the closed state.

🔩 Multimeter 🔩 Electrolux dryer door switch ($20–$50)
4

Check latch wiring

Reseat the connector between the latch and the control board.

⚠️ Unplug before opening the cabinet.

How to Reset Error Code E01

Unplug 5–10 minutes and retry. If E01 persists, test the door switch and its wiring.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

If the latch and wiring test good, the control board door input has failed.

Average professional repair cost for this issue: $150–$300

Related Error Codes

E40

Door circuit fault — control cannot confirm the door state

⚠ Medium Severity

Same Code on Other Brands

Error code E01 appears on these other brands too. See every brand that shows E01 →

Bosch Washing Machine F01

Water intake timeout — machine failed to fill within the expected time

Bosch Dishwasher E01

Heating element or NTC sensor failure — water not heating

Broan-NuTone Range Hood E01

Fan motor overload — motor drawing excess current

Bosch Refrigerator E01

Refrigerator compartment temperature sensor fault

Find Replacement Parts

Use these links to find the exact replacement parts for your Electrolux Dryer:

🔩

Search PartSelect

Electrolux Dryer repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Electrolux Dryer Error Codes

E61 Insufficient heating — dryer not reaching temperature E64 Heating element failure — open circuit E62 NTC temperature sensor failure E20 Water drainage / condensate pump fault (condenser & heat-pump dryers) E93 Configuration / communication error in the electronics EHd Heating / power-supply circuit fault

Frequently Asked Questions

Can I keep using my Electrolux Dryer when error E01 appears? +

You often can for a cycle or two, but the door issue behind E01 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes E01 on a Electrolux Dryer? +

Across reported Electrolux dryer repairs, the most frequent is door latch/lock worn or not engaging (45% of cases), debris obstructing the latch (20%), then wiring between latch and board loose (20%). Check them in that order before replacing any parts.

E01 keeps coming back after a reset — what should I check next? +

A reset only clears the stored E01 fault; if it returns, the door problem is still present. Move on to the physical checks — reset the dryer, then inspect the door latch — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Electrolux Dryer error E01? +

A DIY repair typically runs $20–$50 in parts, versus $150–$300 for a professional service call, so handling it yourself saves around $130. Expect the work to take roughly 30–60 minutes.

Sources & References

• Electrolux Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Electrolux Dryer Error Codes ← All Electrolux Error Codes