ApplianceErrors.com

Electrolux Dryer Error Code E64

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧 Moderate DIY

Heating element failure — open circuit

The most common cause of the E64 error on a Electrolux dryer is element burned through (~70% of cases); start with: test heating element.

💰 DIY cost: $40–$90 👨‍🔧 Pro cost: $200–$400 Save $160+ by doing it yourself
Electrolux Dryer error code E64 on the display panel
How the E64 code appears on a Electrolux dryer display

What Does Error Code E64 Mean on a Electrolux Dryer?

Heating element failure — open circuit.

The control board monitors current draw through the heating element circuit. E64 fires when it senses an open circuit — no current flowing — meaning the element has burned through or a terminal/connection has failed, so the drum tumbles but produces no heat. This distinguishes it from related code E61, which typically flags a shorted or over-current heater condition rather than an open one. Restricted exhaust airflow raises element temperature over time and accelerates burnout.

Models affected: Electrolux electric dryers with an electronic control board and current-monitored heating circuit, including models such as the EFME627UTT and ELFE7637AT
What owners report: Owners commonly report clothes coming out damp with the drum still spinning, and the code often surfaces on older units or after long-neglected vent cleaning. Before assuming the worst, some find a burned terminal or loose wire rather than a fully failed element, which is a cheaper fix.

What Causes Error Code E64?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Element burned through 70% of cases
  2. 2
    Element terminals burned 20% of cases
  3. 3
    Wiring to element damaged 10% of cases

How to Fix Electrolux Dryer Error Code E64

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Test heating element

    Disconnect and test for continuity. Open circuit = failed.

    🔩 Multimeter 🔩 Electrolux dryer element ($40–$90)
  2. 2

    Replace element

    Access from back panel.

    ⚠️ Unplug dryer before accessing element.

How to Reset Error Code E64

After replacement, run test cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Dryer not heating →

Did this guide fix your appliance?

When to Call a Professional

If element replaced and no heat, board heater relay has failed.

Average professional repair cost for this issue: $200–$400

Related Error Codes

E61
Insufficient heating — dryer not reaching temperature
⚠ High Severity

Same Code on Other Brands

Error code E64 appears on these other brands too. See every brand that shows E64 →

GE Appliances logo
GE Appliances Washing Machine E64
Heater open circuit — heating element has failed
Frigidaire logo
Frigidaire Dryer E64
Heating element failure

Find Replacement Parts

Use these links to find the exact replacement parts for your Electrolux Dryer:

🔩
Search PartSelect
Electrolux Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Electrolux Dryer Error Codes

E62 NTC temperature sensor failure E01 Door lock / safety circuit fault — dryer will not start E20 Water drainage / condensate pump fault (condenser & heat-pump dryers) E40 Door circuit fault — control cannot confirm the door state E93 Configuration / communication error in the electronics EHd Heating / power-supply circuit fault

Frequently Asked Questions

Can I keep using my Electrolux Dryer when error E64 appears? +
It is not advisable. The dryer may still power on, but running it while E64 is active can worsen the heating fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes E64 on a Electrolux Dryer? +
Across reported Electrolux dryer repairs, the most frequent is element burned through (70% of cases), element terminals burned (20%), then wiring to element damaged (10%). Check them in that order before replacing any parts.
E64 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E64 fault; if it returns, the heating problem is still present. Move on to the physical checks — test heating element, then replace element — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Electrolux Dryer error E64? +
A DIY repair typically runs $40–$90 in parts, versus $200–$400 for a professional service call, so handling it yourself saves around $160. Expect the work to take roughly 30–60 minutes.
Which Electrolux Dryer models show error E64? +
E64 is documented on Electrolux electric dryers with an electronic control board and current-monitored heating circuit, including models such as the EFME627UTT and ELFE7637AT. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Electrolux Dryer Error Codes ← All Electrolux Error Codes