ApplianceErrors.com

Frigidaire Dryer Error Code E64

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧 Moderate DIY

Heating element failure

The most common cause of the E64 error on a Frigidaire dryer is element burned through (open circuit) (~65% of cases); start with: test heating element.

💰 DIY cost: $35–$80 👨‍🔧 Pro cost: $200–$380 Save $165+ by doing it yourself
Frigidaire Dryer error code E64 on the display panel
How the E64 code appears on a Frigidaire dryer display

What Does Error Code E64 Mean on a Frigidaire Dryer?

Heating element failure.

The E64 code fires when the control board reads an open circuit across the heating element circuit, meaning current cannot flow through the coil to generate heat. The drum motor still runs but no heat is produced, so clothes come out damp. The board distinguishes this open-circuit condition from thermistor or temperature-related faults (such as E11) by checking element continuity rather than sensor readings. Restricted exhaust airflow can accelerate the coil burning through.

Models affected: Frigidaire electric dryers with electronic control boards, including models such as the FFRE4120SW
What owners report: Owners commonly report E64 appearing after a normal-sounding cycle leaves laundry cold and still wet. It can sometimes follow long periods of clogged lint or blocked venting, so checking and clearing the exhaust before ordering parts is a frequent quick win, though a burned-through element usually still needs replacing.

What Causes Error Code E64?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Element burned through (open circuit) 65% of cases
  2. 2
    Element wiring burned 25% of cases
  3. 3
    Heater relay on board failed 10% of cases

How to Fix Frigidaire Dryer Error Code E64

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Test heating element

    Disconnect wires, test continuity. Should read 10–15 ohms.

    🔩 Multimeter
  2. 2

    Replace element

    Access element from back panel.

    🔩 Frigidaire dryer heating element ($35–$80)
    ⚠️ Unplug first.
  3. 3

    Check board relay

    If element OK, board heater relay failed.

How to Reset Error Code E64

After replacement, run test cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Dryer not heating →

Did this guide fix your appliance?

When to Call a Professional

If element replaced and no heat, control board relay needs testing.

Average professional repair cost for this issue: $200–$380

Related Error Codes

E11
Control board failure
⚠ High Severity

Same Code on Other Brands

Error code E64 appears on these other brands too. See every brand that shows E64 →

GE Appliances logo
GE Appliances Washing Machine E64
Heater open circuit — heating element has failed
Electrolux logo
Electrolux Dryer E64
Heating element failure — open circuit

Find Replacement Parts

Use these links to find the exact replacement parts for your Frigidaire Dryer:

🔩
Search PartSelect
Frigidaire Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions

Can I keep using my Frigidaire Dryer when error E64 appears? +
It is not advisable. The dryer may still power on, but running it while E64 is active can worsen the heating fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes E64 on a Frigidaire Dryer? +
Across reported Frigidaire dryer repairs, the most frequent is element burned through (open circuit) (65% of cases), element wiring burned (25%), then heater relay on board failed (10%). Check them in that order before replacing any parts.
E64 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E64 fault; if it returns, the heating problem is still present. Move on to the physical checks — test heating element, then replace element — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Frigidaire Dryer error E64? +
A DIY repair typically runs $35–$80 in parts, versus $200–$380 for a professional service call, so handling it yourself saves around $165. Expect the work to take roughly 30–60 minutes.
Which Frigidaire Dryer models show error E64? +
E64 is documented on Frigidaire electric dryers with electronic control boards, including models such as the FFRE4120SW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Frigidaire Dryer Error Codes ← All Frigidaire Error Codes